Resolving Software Conflicts; Using The Extensions Manager - Wacom GRAPHIRE - FOR MACINTOSH User Manual

RESOLVING SOFTWARE CONFLICTS
If you are troubleshooting and found no problems with the tablet hardware, or if the W
appears with a red X through it when starting your computer, follow the steps below to locate a possible
software conflict. (A red X through the W
properly.)

Using the Extensions Manager

To use the Extensions Manager to resolve a software conflict:
1. Restart your computer with the S
S key. Then from the Apple menu choose C
HIFT
2. From the S
ELECTED
3. Place a checkmark next to the W
prompted to create a duplicate set. Give the set a name, such as "test". Then again select the W
T item and restart your computer.
ABLET
4. If the system starts up successfully with the W
Turn on three of the disabled items and restart. Repeat this process until all items are on or until the
system crashes.
5. If the system crashes again, restart the computer with the spacebar held down (this will bring up the
E M
XTENSIONS ANAGER
6. Now turn off one or two of the items that appear to be the problem.
7. Repeat this process as necessary until you find the offending INIT. If the conflicting item is not
required, leave it disabled. Otherwise, check if an updated version is available or contact Wacom
Technical Support.
ACOM
key held down. When the system has fully booted, release the
HIFT
S drop-down menu, select the S
ET
T
ACOM
). The conflicting item is most likely one of the most recently enabled items.
Contents
Index
T icon means the Wacom tablet driver failed to load
ABLET
P
ONTROL ANELS
YSTEM
driver in the list of C
ABLET
T item active, open the Extensions Manager.
ACOM ABLET
and E M
XTENSIONS
B extension set.
ASE
P
ONTROL ANELS
HAVING TROUBLE?
T icon
ACOM ABLET
.
ANAGER
. You will be
ACOM
Page 84