Subscribe to Our Youtube Channel
Related Manuals for Cytron Technologies MD10C R3.0
Summary of Contents for Cytron Technologies MD10C R3.0
- Page 1 R OBOT . HEAD to TOE P roduct User’s Manual – M D10C R3.0 MD10C R3.0 10Amp DC Motor Driver User's Manual Rev3.0 V1.0 Aug 2018 Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
- Page 2 R OBOT . HEAD to TOE P roduct User’s Manual – M D10C R3.0 INDEX Introduction/Overview Packing List Board Layout and Specification Dimension Getting Started Warranty Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
- Page 3 No additional Vin is required. ● Support TTL PWM from microcontroller, n ot PWM from RC receiver . ● Dimension: 7 5mm x 43mm *MD10C is now Revision 3.0 Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
- Page 4 R OBOT . HEAD to TOE P roduct User’s Manual – M D10C R3.0 R ev 3.0 can support motor voltage range from 5 V to 30V ** Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
-
Page 5: Packing List
2 510 PCB Connector - 3 Ways (Female) ● 3 x 2 510 Terminal Pin ● 4 x plastic spacer (~7mm) ● User’s manual can be downloaded from https://www.cytron.io Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved... - Page 6 A to B. D. R ed LED B – Turns on when the output A is low and output B is high. Indicates the current flows from output B to A. Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
-
Page 7: Operation
Maximum PWM Frequency *** * T ested under 25 ℃ (room temperature) environment, without airflow and heatsink. ** Must not exceed 10 seconds. *** Actual output frequency is same as input frequency. Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved... - Page 8 R OBOT . HEAD to TOE P roduct User’s Manual – M D10C R3.0 4. DIMENSION Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
-
Page 9: Getting Started
MD10C is provided and is available for download at Cytron’s website under the product page. S K40C is used in the demonstration and the connection diagram is as follow: Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved... - Page 10 Using MDD10A with Arduino UNO - MDD10A is just two channel MD10C :) ● Controlling 10A DC Motor Driver Using Arduino Nano ● Measuring DC Motor RPM Through Built-in Hall Sensor Encoder Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
-
Page 11: Warranty
Cytron Technologies Sdn. Bhd. No. 1, Lorong Industri Impian 1, Taman Industri Impian, 14000 Bukit Mertajam, Penang, Malaysia. Tel: +604-548 0668 Fax: +604-548 0669 URL: www.cytron.io Email: s upport@cytron.io sales@cytron.io Created by Cytron Technologies Sdn. Bhd. – All Rights Reserved...
Need help?
Do you have a question about the MD10C R3.0 and is the answer not in the manual?
Questions and answers