Motorola AP-5181 - Wireless Access Point Specifications Manual page 8

1-2 Enterprise Wireless LAN Antenna Specification Guide
1.1.1 Access Points and Access Ports Supported
The antennas and accessories referenced in this guide are intended to customize the radiated signal lobes
of Motorola's WLAN product suite.
The access port (AP) supported is the AP300 (Part No. WSAP-5100-100-WWR). This access port has no
integrated antennas and some antenna must be added to the device. The AP300 supports both 5 GHz
(802.11a) and 2.4 GHZ (802.11b/g). The AP300 has two sets of antenna connectors providing diversity (for
each spectrum supported.
The two 5 GHz connectors on the AP300 are - RPSMA-Female
The two 2.4 GHz connectors on the AP300 are - RPBNC-Female
The AP-5131 and AP-5181 access points are also addressed in this document. For an AP-5131, there are
several different part number configurations unrelated to the actual antenna connections. An AP-5131 and
AP-5181 supports both 5 GHz (802.11a) and 2.4 GHZ (802.11b/g). Valid AP-5131 part numbers include:
The AP-5131 supports both 5 GHz and 2.4 GHZ spectrums, but the antenna connectors implemented on the
AP provide dual spectrum capability - both spectrums on one physical connector.
The connectors on the AP-5131are RP-SMA-Female.
The AP-5181 is used outdoors and only one part number is currently available (AP-5181-13040-WWR). Since
this device is intended to be mounted outside in unpredeicable weather, lightening protection is integrated
into the device design. As such, no additional lightning protection is required.
The connectors on the AP-5181are N-Type-Female.
NOTE:
.
AP Port 1
AP-7131
● 2.4GHz
AP-300
Radio 1 ●
AP-5131
Radio 1 ●
AP-5181
AP Antenna Port Connectors
Port 2
R1-A R1-B
11n 2.4 GHz and 5 GHz (dual band)
●● 2.4GHz
11bg
RP-BNC(f)
Radio 1 ●●
11bg
RP-SMA(f)
Radio 1 ●●
11bg
Type N(f)
Port 3 Port 4
R1-C R2-A
RP-SMA(f)
● 5GHz ●● 5GHz
11a
RP-SMA(f)
Radio 2 ● Radio 2 ●●
11a
Radio 2 ● Radio 2 ●●
11a
Port 5 Port 6
R2-B R2-C