Whirlpool 3XLGR5437 Installation Instructions Manual
Whirlpool 3XLGR5437 Installation Instructions Manual

Whirlpool 3XLGR5437 Installation Instructions Manual

Hide thumbs Also See for 3XLGR5437:

Advertisement

Available languages

Available languages

Quick Links

Installation Instructions
for model:
3XLGR5437
IMPORTANT:
Read and save these
instructions.
Installer: Leave Installation Instructions
with the homeowner.
Homeowner: Keep Installation
Instructions for future reference.
For best performance, install dryer
according to Installation Instructions.
Failure to complete installation as
instructed could void warranty.
Save Installation Instructions for local
inspector's use.
8528097
Set to operate on NATURAL GAS.
Introduction
Set to operate on NATURAL GAS (see Technical Specification). For L.P.
gas conversion (butane or propane), see "Gas supply" section. Before
installation, check that the local distribution conditions, nature of gas and
pressure, and the adjustment of the appliance are compatible. If in doubt,
then installer must contact the gas supplier.
This appliance must be installed in accordance with the rules in force, and
used only in a sufficiently ventilated space. Consult instructions before
installation and use of this appliance.
Installation, service or conversion for use on other gas supplies must
be done by a competent installer, service agency or the gas supplier.
Have questions about your dryer?
Call your dealer or local authorized service company.
When you call, you will need the dryer model number
and serial number. Both numbers are on the
model/serial rating plate located in the door well behind
the dryer door and on front of opening.
Record the numbers here for handy reference:
Model No.
Serial No.
Gas
Dryer
Part No. 8528097

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3XLGR5437 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Whirlpool 3XLGR5437

  • Page 1 Installation Instructions Dryer for model: 3XLGR5437 Set to operate on NATURAL GAS. Part No. 8528097 IMPORTANT: Introduction Read and save these Set to operate on NATURAL GAS (see Technical Specification). For L.P. gas conversion (butane or propane), see “Gas supply” section. Before instructions.
  • Page 2 Before you start... Tools and materials Venting needed for Vent System Your safety and the safety of installation... others are very important. 100 mm (4") metal exhaust vent must We have provided many important be used. safety messages in this manual •...
  • Page 3: Dryer Location And Dimensions

    Dimensions shown with feet extended 2.5 cm (1") from bottom of dryer. Dryer location and 27.9 cm (11") dimensions An electrical outlet is required within 1.4 m (4-1/2 feet) for the power supply cord WARNING 35.6 cm (14") door clearance 109.5 cm (43-1/8") 3.8 cm...
  • Page 4: Electrical Requirements

    (20 feet). Pipe-joint compounds resistant Electrical requirements Gas supply to the action of L.P gas must be used. Gas connection to the dryer itself should be made by means of a flexible gas WARNING WARNING hose suitable for the appliance and gas category.
  • Page 5: Exhaust Requirements

    An exhaust hood should cap the Plan the exhaust vent Exhaust requirements exhaust vent to prevent exhausted air installation from returning to the dryer. Exhaust outlet hood WARNING 30.5 cm must be at least 30.5 (12") min. cm (12 inches) from the ground or any object that may be in the path of the...
  • Page 6 Determine vent length 2. Determine the number of elbows you Prepare dryer will need. Preferred — 3. In the column listing the type of WARNING metal vent you are using (rigid or flexible), find the maximum length of metal vent on the same line as the Excessive Weight Hazard number of elbows.
  • Page 7 manual shutoff valve Read the Use and Care Guide to Level dryer “open” position fully understand your new dryer. Select a Dryer must be level to reduce noise full heat cycle (not the air cycle) and to dryer start dryer. After five minutes, open dryer and assure proper performance.
  • Page 8: Moving Dryer To A New Location

    Propane supply pressure (G31): 37 mbar 30 mbar Adjusted pressure: NOTE: Conversion kit : From Natural Gas to LP Gas : Whirlpool Part No. 279918. Manufacturer : Whirlpool Corporation, Benton Harbor, Michigan 49022, USA. Part No. 8528097 Printed in U.S.A.
  • Page 9: Instrucciones De Instalación

    Instrucciones de Instalación Secadora a para el modelo: 3XLGR5437 Para funcionar con GAS NATURAL. Pieza No. 8528097 IMPORTANTE: Introducción Para funcionar con GAS NATURAL (vea la Especificación Técnica). Para Lea y guarde estas conversión a gas L.P. (butano o propano), vea la sección “Suministro de gas”.
  • Page 10 • Llame de inmediato a su Piezas suministradas Antes de empezar... proveedor de gas desde un teléfono vecino. Siga las para la instalación... instrucciones del proveedor de Su seguridad y la seguridad de gas. Saque el paquete de los demás son muy importantes. piezas del tambor de •...
  • Page 11 Las dimensiones indicadas son con las patas extendidas 2,5 cm del fondo de la secadora. Ubicación y 27,9 cm dimensiones de la Se requiere un receptáculo eléctrico a no más de 1,4 m para el cordón de suministro de energía secadora espacio libre para la puerta ADVERTENCIA...
  • Page 12: Requisitos Eléctricos

    de su distribuidor. En el kit se Requisitos eléctricos Suministro de gas encuentran las instrucciones completas. Requisitos de la tubería de ADVERTENCIA ADVERTENCIA suministro: Se debe proveer una tubería rígida de suministro de gas a la secadora. Debe tener un diámetro interior mínimo de 12,5 cm.
  • Page 13 Se recomienda un conducto de Planifique la instalación Requisitos para la metal rígido para evitar que se del conducto de salida aplaste o pliegue. salida de aire Los conductos de salida de aire de de aire metal flexible deben estar completamente extendidos y ADVERTENCIA soportados cuando la secadora esté...
  • Page 14 Determine la longitud del 2. Determine el número de codos que Prepare la secadora conducto de salida de aire vaya a necesitar. 3. En la columna que indica el tipo de Preferido — ADVERTENCIA conducto de metal que está usando (rígido o flexible), busque la longitud máxima del conducto metálico en la Peligro de peso excesivo...
  • Page 15 ha asegurado todas las juntas del válvula manual de cierre Nivele la secadora en posición “abierta” conducto de salida de aire con abrazaderas de 100 mm. a la La secadora debe estar nivelada para secadora tiene todas las herramientas con reducir el ruido y asegurar un buen las que comenzó.
  • Page 16: Especificaciones Técnicas

    Presión de suministro de propano (G31): 37 mbar 30 mbar Presión ajustada: NOTA: Kit de conversión: de Gas Natural a Gas LP: Pieza Whirlpool No. 279918. Fabricante: Whirlpool Corporation, Benton Harbor, Michigan 49022. EE.UU. Pieza No. 8528097 Impreso en EE.UU.
  • Page 17: Instructions D'installation

    Instructions d’installation Sèche-linge à pour le modèle : 3XLGR5437 Régler l’appareil pour l’alimentation au GAZ NATUREL. Pièce N° 8528097 IMPORTANT : Introduction Lire et conserver ces Régler l’appareil pour l’alimentation au GAZ NATUREL (voir Spécifications techniques). Pour la conversion pour l’alimentation au propane ou au butane, instructions.
  • Page 18 • Contacter immédiatement le Pièces fournies pour Avant de commencer… fournisseur de gaz à partir du l’installation... téléphone d’un voisin. Exécuter les instructions communiquées par le fournisseur de gaz. Retirer le sachet de Votre sécurité et celle des pièces du tambour du •...
  • Page 19 Dimensions indiquées pour la situation avec les pieds déployés de 25,4 mm au-dessous du sèche-linge. Emplacement 27,9 cm d’installation et Prise de courant électrique nécessaire à moins de 1,4 m dimensions du pour le raccordement au réseau sèche-linge Encombrement de la porte : 35,6 cm 109,5 cm AVERTISSEMENT...
  • Page 20: Spécifications De L'installation Électrique

    chez le revendeur. Les instructions Spécifications de Arrivée de gaz complètes sont fournies avec l’installation électrique l’ensemble. Canalisation de gaz : AVERTISSEMENT Installer une canalisation rigide jusqu’à AVERTISSEMENT l’emplacement d’installation du sèche- linge (dia. int. 12,5 mm). Si ceci est autorisé...
  • Page 21 Un conduit métallique rigide est Planification de Décharge - recommandé pour éviter l’écrasement l’installation du circuit ou la déformation du conduit. Spécifications Un conduit métallique flexible doit de décharge être totalement déployé et soutenu lorsque le sèche-linge est à sa AVERTENCIA position finale.
  • Page 22 Longueur du conduit 2. Déterminer le nombre de coudes Préparation du nécessaires. Préférable — sèche-linge 3. Dans la colonne correspondant au type de conduit métallique utilisé AVERTISSEMENT (rigide ou flexible), identifier la longueur maximale de conduit métallique sur la Danger - Poids excessif 10,2 cm ligne correspondant au nombre de 10,2 cm...
  • Page 23 robinet d’arrêt manuel – Brancher le cordon d’alimentation Aplomb du sèche-linge position d’ouverture sur une prise de courant reliée à la vers sèche- On doit ajuster l’aplomb du sèche- terre. Mettre l’appareil sous tension. linge linge pour minimiser le bruit et garantir Lire attentivement le Guide une performance optimale.
  • Page 24: Spécifications Techniques

    Pression d’alimentation – propane (G31) : 37 mbar 30 mbar Pression de réglage : NOTE : ensemble de conversion : de gaz naturel à butane/propane : produit Whirlpool no 279918. Fabricant : Whirlpool Corporation, Benton Harbor, Michigan 49022, É.-U. Pièce N° 8528097 Imprimé aux États-Unis ©...

Table of Contents