Establishing a WPS Connection
If a Wi-Fi client connected to the Mobile WiFi supports the WPS function, a network key
will be automatically generated without manual input. To establish a WPS connection,
perform the following steps:
1.
Power on the Mobile WiFi.
2.
Start the client.
3.
Enable the WPS function of the Mobile WiFi.
Note: After Wi-Fi is enabled, press and hold
to enable the WPS function of the Mobile WiFi.
4.
Enable the WPS function of the client.
Note: For WPS operations on the client, see the user guide of the client.
WPS
15
WPS