SCS TB-9037 Advance Installation, Operation And Maintenance

USER GUIDE TB-9037
EM Aware Monitor
Installation, Operation and Maintenance
Figure 1. SCS EM Aware Monitor
Description
The SCS EM Aware Monitor monitors up to three key
parameters that keep you aware of critical symptoms
of ESD problems: ESD events, change in static voltage
field, and ionizer performance*. The thresholds for
these parameters are fully adjustable. The monitor is
constructed of an aluminum enclosure, LCD display,
control joystick, remote antenna, power adapter and
data output terminal.
ESD events generate electromagnetic radiation.
The stronger the ESD event, the stronger the
electromagnetic radiation. The EM Aware Monitor is a
miniature radio receiver tuned to detect and measure
the unique waveform generated by an ESD event.
The EM Aware Monitor meets the Continuous Monitor
requirements of ANSI/ESD S20.20 in accordance with
ESD TR1.0-01 and ANSI/ESD STM3.1. It meets the
recommendations of ESD Handbook ESD TR20.20
which includes "if the products that are being produced
are of such value that knowledge of a continuous,
reliable ground is needed, and then continuous
monitoring should be considered or even required".
*Ionization monitoring is only available in item
CTC034-031-5-WW. Compatible with critical
environment ionizers only. The ionizer must have a
balance (offset voltage) of ±5V or better.
TB-9037 Page 1 of 10 December 2017
SCS - 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website:
The EM Aware Monitor and its accessories are available
as the following item numbers:
Item Description
CTC034-030-3-WW EM Aware Monitor, ESD Events,
4.20mA Output
CTC034-030-5-WW EM Aware Monitor, ESD Events,
Modbus Output
CTC034-031-5-WW EM Aware Monitor, ESD Events,
Static Field & Ionization, Modbus
Output
770038 Data Logger, Dataq DI-710, for EM
Aware Monitor
CTA212 Power Adapter, 100-240VAC Input,
12VDC 1.5A Output, All Plugs
CTC111-6FT Antenna, Room Temperature, 6 ft.
CTC118-6FT Antenna, High Temperature, 6 ft.
CTC118-10FT Antenna, High Temperature, 10 ft.
Packaging
1 EM Aware Monitor
1 CTC111-6FT Antenna with 6 ft. Cable
1 Monitor Ground Cord (Green and Yellow)
1 Power Adapter, 12VDC, with interchangeable plugs
(North America, UK/Asia, Europe)
1 Certificate of Calibration
StaticControl.com
Made in the
United States of America
© 2017 DESCO INDUSTRIES, INC.
Employee Owned