Specifications - Canon Wireless File Transmitter WFT-E4 II A Instruction Manual

Wireless file transmitter for eos 5d mark ii
Hide thumbs Also See for Wireless File Transmitter WFT-E4 II A:
Table of Contents

Advertisement

Specifications

Type
Type:
Wireless LAN
Standards compliance:
Transmission method:
Transmission range:
Transmission frequency:
(central frequency)
Connection method:
Security:
Wired LAN
Standards compliance:
USB Connection
Connectable devices:
Interfaces
Camera:
Wired LAN:
External device:
Image transfer accessory that can be used in wireless LANs and over
Ethernet in wired LANs (IPsec-compatible). Can be connected via USB
to external media, GPS devices, and Bluetooth units. Controls for
vertical shooting included.
IEEE 802.11a (WFT-E4 IIA/B/C) and ARIB STD-T71
IEEE 802.11b and ARIB STD-T66
IEEE 802.11g and ARIB STD-T66
OFDM modulation (IEEE 802.11a/g)
DS-SS modulation (IEEE 802.11b)
Approx. 150 m / 492 ft.
* With no obstructions between the transmitting and receiving antennas
and no radio interference
* With a large, high-performance antenna attached to the wireless LAN
access point
WFT-E4 IIA: 5,180 - 5,320 MHz, channels 36 - 64
5,745 - 5,825 MHz, channels 149 - 165
2,412 - 2,462 MHz, channels 1 - 11
WFT-E4 IIB: 5,180 - 5,320 MHz, channels 36 - 64
5,500 - 5,700 MHz, channels 100 - 140
2,412 - 2,472 MHz, channels 1 - 13
WFT-E4 IIC: 5,745 - 5,805 MHz, channels 149 - 161
2,412 - 2,472 MHz, channels 1 - 13
WFT-E4 IID: 2,412 - 2,462 MHz, channels 1 - 11
Infrastructure or ad hoc mode
* Wi-Fi Protected Setup supported
Authentication method: Open, shared key, WPA-PSK, and WPA2-PSK
Encryption: WEP, TKIP, and AES
IEEE 802.3u (Ethernet 10BASE-T and 100BASE-TX)
External media, GPS devices, and Bluetooth units
Extension system terminal
Ethernet RJ-45 port
Hi-Speed USB port (for attaching external media, GPS devices, and
Bluetooth units)
115

Advertisement

Table of Contents
loading

Table of Contents