Memory Recall Mode - Seiko H024 Instructions Manual

MEMORY RECALL MODE (RCLL)
●
The first 100 lap and split times are automatically stored in memory and can be
recalled either during or after the stopwatch measurement.
●
Even if the digits are reset to "00" in the stopwatch measurement, the stored data
is not erased and can be recalled unless a new measurement is started.
●
In order to recall lap and split times while timing an event, press Button A to cycle
through the 5 different modes. The stopwatch mode indicator (CHR) will continue
to flash to indicate that the STOPWATCH mode is in use.
A
Press to show the MEMORY RECALL mode.
A
15