Page 1
U S E R G U I D E JVC43B Double Brush Autoscrubber With Lithium Battery...
Page 2
All units sold by Johnny Vac have a user manual that is an integral part of the device sold. Please read this instruction manual carefully before using your device. Photos are included in this manual to help you visualize the informations.
Page 3
IT IS RECOMMENDED TO KEEP THIS USER GUIDE FOR FUTURE REFERENCES. ATTENTION: PLEASE READ CAREFULLY THE INSTRUCTION MANUAL BEFORE USING. JVC43B User Guide - 3 -...
These instructions must be considered to avoid risks that could lead to physical and/or material damage. Target audience This user manual is intended for operators of the JVC43B and their supervisors, as well as partners and importers. Operators of the JVC43B...
Page 5
Batteries must be disposed of according to your local laws and regulations. Indicates the machine can cause floors to SLIPPERY become slippery.in the work place, advised to place slippery surface SURFACE signs in these areas. JVC43B - 5 - User Guide...
Using life Each JVC43B is guaranteed to operate for one year. The wear on brushes and squeegee heavily depends on the roughness of the surface. They need to be checked regularly. Ensure proper and safe operation throughout the life of the JVC43B, the machine must be checked every 500 hours by an authorized partner;...
SPEC IFICATIONS It is not permitted to make modifications to the design of the JVC43B without consultation and permission from the manufacturer. This affects the warranty. Item Data Rated voltage DC-36 V Working efficiency 800-1000 sqm/h Brush size (2) 8 in...
Page 8
• The body that contains the motors (one vacuum motor, two brush motors), cleaning solution tank, recovery tank,handle and control panel with 3 functional buttons & one power display window). • The scrub deck that contains the brushes and squeegee. The JVC43B can be folded into a park position; this is recommended for storage.
Make sure to check the condition of the brush before use. Change the brush only when the machine is turned off in a park position Machine orientation Always keep the body of the JVC43B in an upright position when cleaning fluid or batteries are inserted. Strong magnets Please be aware of the integrated magnets that hold the fluid tanks in place.
OPERATION Risks during operation Dress safely Do not wear a necktie, scarf, or any loose or dangling clothing or jewelry while operating the JVC43B, these can tangle in rotating parts, causing serious injury or death. Mark the job site The JVC43B is designed to leave a dry floor without slippery patches, no additional drying is required.
Lift the JVC43B going from one building to another. Assembly and installation The JVC43B almost does not require the assembly, you will have to get the wire connectors inserted in place in the battery pack box after taking the machine from the box.
3. Replace the stopper and make sure it seals tight. 4. Put the JVC43B in park position. 5. Put the tank on the JVC43B with the valve first. 6. Press the tank downward to break the valve seal. 7. Push the tank into place until you hear a "click".
Page 13
1. Put the JVC43B in park position (refer to the below image). 2. Hold the handle with one hand (refer to the below image). 3. Walk slowly and pay extra attention if you pull the JVC43B over obstacles. 4. To lift the JVC43B over obstacles, always use two hands.
Page 14
Push the handle forward with your other hand Crouch down while holding the carrying handle of the scrub deck To stop one of the castor wheels WARNING Never push down the scrub deck with your foot JVC43B - 14 - User Guide...
Page 15
2. Push the handle forward with your other hand. 3. Bring the scrub deck slowly down to the floor. 4. stand behind the JVC43B. 5. Choose your cleaning mode via the mode buttons/switches (refer to the below image) after pressing down the main On/Off switch first at the rear side of the control panel (refer to the below image),...
Page 16
6. Hold the handle with both hand . 7. Walk behind the JVC43B. 8. Steer by gently turning the handle left or right to move the scrub deck. If you want to stop cleaning the floor , please according flow instruction : 1.
1. Please ensure that the JVC43B is parked in a place where nobody can bump into it. 2. Put the JVC43B in the park position. 3. Store the JVC43B close to a wall with the handle pointing towards the wall and the brushes facing away from the wall.
(stripping pads holder) by two hands and pull the brush out against machine; Each 2 screws 3. Visually inspect the motor disks 4. Clean the JVC43B scrub deck with a clean, dry cloth before you install the brushes or striping pads holder. Squeegee replacement The squeegee blades come in pairs and wear out over time.
Page 19
4. Carefully pull the vacuum hose from the top of the machine 5. Hold the scrub deck firmly with one hand. 6. Align the pins on the scrub deck with the holes on the squeegee. 7. Screw the squeegee in place. JVC43B User Guide - 19 -...
Replace vacuum hose 1. Detach the squeegee as described in above sections. 2. Remove the solution tank. You can see where the vacuum hose is connected at the JVC43B handle. 3. Hold the scrub deck firmly with one hand, 4. Detach the vacuum hose by twisting the connector 1/4 turn anticlockwise.
Request for service Tanks incorrectly placed Check and reattach fluid tanks Leakage Tear in vacuum hose Replace vacuum hose or request for service Battery not charging Battery is at end of life Replace battery JVC43B - 21 - User Guide...
Page 24
Your specialist in vacuum cleaners and maintenance solutions PARTS, ACCESSORIES & VACUUM BAGS VISIT OUR WEBSITE AT WWW.JOHNNYVAC.COM CONGRATULATIONS & THANK YOU for having chosen one of our product. ATTENTION Do not return the unit to the retailer before having spoken with us. Our most precious wish is that you really love your vacuum cleaner! In case of problems, contact our experts at 1 800 361-2043...
Need help?
Do you have a question about the JVC43B and is the answer not in the manual?
Questions and answers