Advertisement
Quick Links
Model #
1316AUFc
McKenzie Queen
Storage Bed
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions and Finishing Hints before
you begin your project.
CALL US FIRST!
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, contact Whittier Wood
Products customer service department by phone,
fax, mail or email.
Hours: Our friendly customer service staff can
be reached Monday-Friday 7:00 a.m. to 5:00 p.m.
(Pacific Time). You may leave a message
24 hours a day, seven days a week.
800-653-3336
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
Do not return this item to the store.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
Production Code:
VN
IMPORTANT NOTES:
For normal household use only. Not recommended
for commercial use.
Remove items before you move this unit.
Before you load or move this unit, tighten all screws
and supports.
Do not overload the drawers in this unit.
Before you begin your project, completely read the
Assembly Instructions and Finishing Hints.
Store this unit: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
This assembly requires two people.
.
04/11
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Whittier Wood Furniture McKenzie 1316AUFc
Summary of Contents for Whittier Wood Furniture McKenzie 1316AUFc
- Page 1 Model # 1316AUFc McKenzie Queen Storage Bed Assembly Instructions IMPORTANT NOTES: For normal household use only. Not recommended for commercial use. Remove items before you move this unit. Before you load or move this unit, tighten all screws and supports. Do not overload the drawers in this unit.
- Page 2 1316AUFc McKenzie Queen Storage Bed — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. 1319AUFb Headboard/Footboard Kit (x1) Quantity Part Description...
- Page 3 1316AUFc McKenzie Queen Storage Bed — Parts List Please identify the parts and check that quantities received match what is on this list. If you need to replace a part, refer to the following letter and item name. 1318AUFc Pedestal Kit (x2) Quantity Part Description...
- Page 4 1316AUFc McKenzie Queen Storage Bed Assembly Instructions This assembly requires two people Tools Required: Phillips screwdriver, 7/16" open end or box end wrench and Tape measure Shipping Straps Fig. 1 Fig. 1a Remove the Trestles (Db) and Foot Assemblies (Ub) from the back of the Headboard (A) and Footboard (Bb) as seen in Figure 1 and 1a and place them off to the side.
- Page 5 Fig. 3a Fig. 3 To attach the Footboard (Bb) to the Pedestal Assembly (Ic), align the Brackets and slide the Pedestal Assembly down on to the Footboard (Bb). See Figures 3 and 3a. Fig. 4 Fig. 4a Repeat step three for the left side. Page 5 —...
- Page 6 Fig. 5 5. Align the Brackets on both sides and slide the Pedestal/Footboard assembly down on to the Headboard (A). See Figure 5. Page 6 — 1316AUFc — 04/11...
- Page 7 Brace F x 6 H x 6 Fig. 6a Footboard First brace Second brace Third brace Fourth brace Fig. 6 Headboard removed for illustration purposes. Open the drawers. Face the Footboard and stand in between the first and second braces. Place a Trestle with T-Nuts (Db) on the outside surfaces of the first upper left and right braces so thatthe T-Nuts (ZU) sit near the top.
- Page 8 Brace Trestle with T-Nuts (Db) F x 8 H x 8 Fourth brace Fig. 7a Third brace Fig. 7 Face the Headboard and stand in between the third and fourth braces. Place a Trestle with T-Nuts (Db) on the outside surfaces of the third upper left and right braces so the t-nuts sit near the top.
- Page 9 Trestle with T-Nuts (Db) F x 8 H x 8 Fig. 8a Fourth set of Trestles Third set of Trestles Fig. 8 8. Facing the Headboard, place two Foot Assemblies (Ub) on the inside faces of the third and fourth upper and lower Trestles. Attach with Washers (H) and 1/4" x 1-3/4" Hex Bolts (F).
- Page 10 F x 4 H x 4 Fig. 9a Second set of Trestles Fig. 9 9. Facing the Footboard, place a Foot Assembly (Ub) on the inside of the second set of Trestles and attach with four Washers (H) and four 1/4" x 1-3/4" Hex Bolts (F). See Figures 9 and 9a. Adjust all three Glides (W) found at the bottoms of the Foot Assemblies so that the Glides just touch the floor.
- Page 11 YF x 2 YD x 8 Fig. 10a Fig. 10 10. Facing the Footboard, attach a 90º Bracket (YF) to the lower brace of the Pedestal Assembly/Footboard with four #6 x 1/2" Philtruss Screws (YD). Repeat for the other side. See Figures 10 and 10a. Page 11 —...
- Page 12 Fig. 11 11. To make sure the bed is square, measure the distance between opposing corners. If one of the measurements is larger, tap on a footboard leg until the measurement is equal. See Figure 11. E x 24 Fig. 12 Place Deckboards (P) as shown in Figure 12.
-
Page 13: Getting Started
Finishing Hints Choosing the Finish: Rubber Tack cloth #220 & #320 1. Choose a finish that will meet your expectations for gloves sandpaper Drop cloth the product you are finishing. Are you matching Rags Mineral spirits Paint brushes existing furniture or do you want a “natural” finish? Paper towels (bristle and Masking Tape...
Need help?
Do you have a question about the McKenzie 1316AUFc and is the answer not in the manual?
Questions and answers