Skross MUV USB Manual

Product overview & functions

1. World Adapter MUV USB
   FOR TRAVELLERS FROM: all over the world TO: more than 220 countries
   
   1. Dual USB port
   2. Release button
   3. Country slider
   4. Euro
   5. UK
   6. Australia/China
   7. USA/Japan
   8. Country-specific plugs
   9. Compatibility (on the socket side)
   10. Australia/China
   11. USA/Japan
   12. UK
   13. Euro

The Original World Adapter MUV USB from SKROSS® enables travellers from all over the world to connect their unearthed 2-pole devices safely in over 220 countries. The built-in high-performance USB charger can charge up to two USB devices simultaneously anywhere in the world.
It can be used with a range of devices, including (2): tablet PCs, smartphones, razors, MP3 players, digital cameras, game consoles, GPS devices, video cameras, etc.
Adapter: maximum 2.5 A;
100 V / 250 W – 250 V / 625 W
USB charger: 5 V / 2400 mA max. shared

Instructions

3. Before use, press the release button (B) and move all country sliders on the side (C) into their starting positions. Move the country slider required (D-G) forwards until it clicks into place.
   
4. Connect the mains connector and/or USB charger cable to the adapter (N), then connect the adapter to the mains (O). The World Adapter MUV USB can be used as a travel adapter and high-performance USB char- ger at the same time (for up to three devices at once).
   After use, return all the country sliders back to their original position (3).
   

Technical specifications

• Designed in Switzerland
• Suitable for all 2-pole devices
• Dual USB port for charging USB devices
• Socket input for: Euro, USA / Japan, Australia / China, UK (UK not in Switzerland version)
• Plugs: Euro, UK, USA / Japan, Australia / China
• Input voltage: 100 V - 250 V
• Max. Load: 2.5 A
• Power: eg at 100 V - 250 W / 250 V - 625 W
• Replaceable fuse: T2.5 A
• USB output: 5 V / 2400 mA
• is not a voltage converter

Safety precautions

• Keep the adapter out of the reach of children.
• The adapter is not a voltage converter.
• The input voltage for the device to be connected must match the voltage of the local mains power supply.
• The adapter is only intended for short-term use and should be disconnected from the mains after use.
• Never use the adapter if the casing is damaged.
• Never expose the adapter to liquids or moisture.
• Using the adapter with higher-powered devices which exceed this product's specifications (W = A × V) will cause the fuse to blow.
• When replacing the fuse, only use a 2.5 A fuse (ceramic or glass)
• Improper use of the adapter will invalidate the manufacturer's warranty. No liability is accepted for damages.
• Keep these instructions.

Customer service
If you have any problems using the MUV series of SKROSS® World Adapters, please contact support@skross.com.