Bauhn AMPDQ-0525-B User Manual

Have you got everything?
Charging
Charging your device
• Press the power button to turn the power bank on.
• Connect the supplied USB-C cable or your devices cable to the relevant port and the
other end to your device.
• Short press the power button twice to turn the power bank off. If no devices are being
charged or the charging load is too low, the power bank will turn off after about 30 seconds.
Charging your power bank
• Connect the supplied USB-C cable to the USB-C port of the power bank and the other
end to your power source. The battery LED indicators will blink.
• The USB-C port can be used for both charging the power bank and device.
Wireless Charging
Place your smart phone facing up on the wireless
charging pad. Once the phone is correctly aligned,
the charging process will auto start.
Note: If the LED indicator is flashing blue, this
means an error has occurred. Either the smart
phone does not support wireless charging or other
objects are obstructing the wireless charging pad.
Fast Charging
When charging your devices or charging your power bank, the fast charging LED
indicator will light up if fast charging is activated.
The power bank will auto quit fast charging mode if using more than one output.
Charge device whilst charging power bank will auto quit fast charging mode.
• Make sure the USB cable is plugged into the output port; unplug the
USB cable and try again.
•
• Try another USB cable and/or USB port.
Some devices require higher outputs to charge. Please check with your
Cannot
charge device
• The power bank will turn off automatically when an minimum load
(about 60mA) is not detected.
• The power bank has built-in temperature protection sensor. Keep the
power bank away from heat, high temperatures and direct sunlight.
• Check that your smart phone supports wireless charging.
• If you have a smart phone case, you must remove when charging.
Wireless
• Ensure your smart phone is facing up and aligned to the centre of the
charging not
wireless charging pad, and remove any metal or other objects between
working
the smart phone and the wireless charging pad.
No LED
• Connect the power bank to your power source to ensure the power
lights when
charging
• Press the power button to check battery status.
device
Capacity
• It is normal for the capacity to slowly drop after a certain usage cycle.
drops
Enjoy using your product!
Well done, you made it.
Now sit back and relax...How nice!
10000 mAh Magnetic Wireless Power Bank
Product Overview
A
A. Wireless Charging Pad
B. Battery LED Indicators
C. Power Button
D. USB-C Port
B
E. USB-A Port
C
F. Fast Charging LED Indicator (Green)
D
Wireless Charging LED Indicator (Blue)
E
F
User Guide
Model: AMPDQ-0525-B
A. Power Bank
E
D
B. USB-C Cable
C. User Guide
E. Protective Bag
LED (Light ON OFF Flashing)
" "quick charging (green) and
Wireless charging (blue) indicators.
Troubleshooting
Capacity
0%
<5%
5%-25%
25%-50%
50%-75%
75%-100%