Bauhn ABTWPDQ-0224-B User Manual

Have you got everything?

Charging

Charging your device

• Press the power button to turn the power bank on.
• Connect the supplied USB-C cable or your devices cable to the relevant port and the
other end to your device.
• If no devices are being charged, the power bank will turn off after 30 seconds.

Charging your power bank

• Connect the supplied USB-C cable to the USB-C port of the power bank and the other
end to your power source. The battery LED indicators will blink.
• The USB-C port can be used for both charging the power bank and device.

Wireless Charging

Press the power button to turn the power bank on. Place your
smart phone facing up on the wireless
charging pad. Once the phone is
correctly aligned, one of the LED
indicators will light up blue, and will light
up green once fast charging is activated.
Note: your smart phone must support wireless charging. If your smart phone does not
charge, this indicates that the smart phone does not support wireless charging and/or
other objects are obstructing the wireless charging pad.
Note: When charging your devices or charging your power bank, the fast charging LED
indicator will light up if fast charging is activated.
• Make sure the USB cable is plugged into the output port; unplug the
USB cable and try again.
• Try another USB cable and/or USB port.
• Some devices require higher outputs to charge. Please check with your
devices spec to confirm compatibility.
Cannot
• The power bank will turn off automatically when an minimum load
charge device
(about 80mA) is not detected.
• The power bank has built-in temperature protection sensor. Keep the
power bank away from heat, high temperatures and direct sunlight.
• Press and hold the power button for 10s to manually reset the power
bank.
• Check that your smart phone supports wireless charging.
• If you have a smart phone case, you must remove.
Wireless
• Ensure your smart phone is facing up and aligned to the centre of the
charging not
wireless charging pad, and remove any metal or other objects between
working
the smart phone and the wireless charging pad.
Cannot
• The power bank can not support the output whilst being charged.
charge
• Please wait until the power bank is fully charged or unplug the USB-C
device whilst
cable at the input port.
charging
power bank
No LED
• Connect the power bank to your power source to ensure the power
lights when
bank has sufficient battery.
charging
• Press the battery status button to check battery status.
device
Capacity
• It is normal for the capacity to slowly drop after a certain usage cycle.
drops
Give us a call
What? You mean this User Guide didn't have ALL the answers? Speak to us!
We'd love to help you get up and running as quickly as possible.
Call our After Sales Support on 1300 002 534.
Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST
Enjoy using your product!
Well done, you made it.
Now sit back and relax... your product is
automatically covered by a 1-year warranty.
How nice!
10000 mAh Magnetic Wireless Power Bank

Product Overview

A
A. Wireless Charging Pad
B. Battery LED Indicators
C. Power Button
D. USB-C Port
B
E. USB-A Port
C
F. Fast Charging LED Indicator (Green)
D
Wireless Charging LED Indicator (Blue)
E
F
LED
Battery
capacity
User Guide
Model: ABTWPDQ-0224-B
D
A. Power Bank
B. USB-C Cable
C. User Guide
D. Warranty Certificat
LED indicator status
100-75% 75-50% 50-25%

Troubleshooting

e
25-0%