Table of Contents
Advertisement
Quick Links
Thank you for purchasing this Panasonic product.
■ To customers
The Installation Instructions is intended for use by installation personnel. Be sure to employ certified personnel to perform the
installation.
After installation, have the installation personnel return these Installation Instructions to you, and save it for future use.
When moving or removing the projector, give this manual to the installation personnel and have them perform the procedure.
■ To installation personnel
Carefully read the Installation Instructions and install this product correctly and safely.
Be sure to read through the section entitled "Read this first!" (page 3) before proceeding with the installation.
After installation, return these Installation Instructions to the customer.
Installation Instructions
ET-PKC200W
Model No.
Wall Mount Bracket
TQZJ493-1
Advertisement
Table of Contents
Related Manuals for Panasonic ET-PKC200W
Summary of Contents for Panasonic ET-PKC200W
- Page 1 Installation Instructions Wall Mount Bracket ET-PKC200W Model No. Thank you for purchasing this Panasonic product. ■ To customers The Installation Instructions is intended for use by installation personnel. Be sure to employ certified personnel to perform the installation. After installation, have the installation personnel return these Installation Instructions to you, and save it for future use.
-
Page 2: Table Of Contents
Contents Read this first! ....................3 Product description ................... 4 Standard installation dimensions ..............6 Installation ......................9 Setting up the screen ......................9 Screws tightening torques ....................9 Attaching the base bracket to the wall ................9 Attaching the arm to the base bracket ................11 Attaching the brackets to the projector ................ -
Page 3: Read This First
Electric shocks may result from contact with any metal objects inside the wall. ■ Panasonic disclaims all liability for any accidents or any damage caused by the installation of the ceiling mount bracket using methods that are not described in these Installation Instructions or methods that do not use the parts specified in these Instructions. -
Page 4: Product Description
Product description This is a wall mount bracket for installing projectors. ■ Structural components Parts name Form (number of parts) Applications This bracket is attached to Base bracket the wall with bolts. × 1 This is attached to the base bracket. - Page 5 Product description (continued) Parts name Form (number of parts) Applications Drop prevention wire for wall mount bracket Drop prevention (3.0 mm (1/8") wire Prevents the wall mount kit for wall mount diameter, 200 mm bracket from falling. bracket (7-7/8") length) ×...
-
Page 6: Standard Installation Dimensions
Standard installation dimensions The dimensional relationship between the screen and the projector is shown below. Establish the dimensions after assessing the area possible for installation. Hight of the projection screen (m) Projection screen Width of the projection screen (m) Diagonal size of the projection screen (m) <Units: mm (")>... - Page 7 Standard installation dimensions (continued) ■ Projection distance (PT-CW330/PT-CW240/PT-CW331R/PT-CW241R) z When the screen aspect ratio is 16:10 (unit: m) Projection screen size Projection Projection Projector top – Base bracket top – Screen size distance A distance B screen top screen top Height (SH) Width (SW) (SD)
- Page 8 Standard installation dimensions (continued) ■ Projection distance (PT-CX300/PT-CX301R) z When the screen aspect ratio is 4:3 (unit: m) Projection screen size Projection Projection Projector top – Base bracket top – Screen size distance A distance B screen top screen top Height (SH) Width (SW) (SD)
-
Page 9: Installation
Installation After checking the height, width, and structure of the installation location while referring to “Standard installation dimensions” on pages 6 to 8, determine the appropriate positions for setting up the screen and installing the projector. Setting up the screen Set up the screen according to the specified method in a position which takes into account the projection distance and angle and the type of screen being used. - Page 10 Installation (continued) <Units: mm (")> Attachment screw of the drop prevention wire for wall mount bracket (base bracket side) Make a hole on a wall within a radius of 150 mm (5-29/32") from the attachment screw for the drop prevention wire for wall mount bracket. Basis for installation of the base bracket 150 (5-29/32") 13 (1/2") ×...
-
Page 11: Attaching The Arm To The Base Bracket
Installation (continued) Attaching the arm to the base bracket 1) Hook the arm to the groove on the base bracket that Base bracket are attached on the wall. 2) Secure the arm with the hex socket head cap bolts (M8 × 20) (four points). 3) Attach the cover plates on the right and left sides of Extra low head hex socket bolts (M5 ×... -
Page 12: Attaching The Brackets To The Projector
Installation (continued) Attaching the brackets to the projector 1) Place the projector upside-down onto a piece of soft Projector installation plate Projector installation material. plate (R) Attention z During the mounting work, be careful of the mirror part so that you do not apply heavy pressure on the projector by such an action as putting your hand on the projector. -
Page 13: Attaching The Drop Prevention Wire
Installation (continued) Attaching the drop prevention wire To prevent the projector from falling, attach the supplied drop prevention wire to the projector, base bracket, and wall. ■ Attach the supplied drop prevention wire for projector body to the projector and base bracket z Use the supplied screw with captive washer (M4 ×... -
Page 14: Adjusting The Image Size And Installation Angle
Installation (continued) Adjusting the image size and installation angle z Adjust the screen position so that the center of the lens and the screen make a right angle. z While referring to the operating instructions for the projector, project an image onto the screen, make a temporary adjustment of the focus, and then adjust the angle. - Page 15 Installation (continued) Note z If the image on the projection screen has keystone distortion, make upward/downward tilt adjustment. ■ If the projected image is too far to the left or right of the screen Horizontal rotation adjustment (Range of adjustment: + 5° - − 5°) 1) Loosen the hex socket head cap bolts 1 beside the “A”...
- Page 16 Installation (continued) ■ If the projected image is tilted upward or downward Upward/downward tilt adjustment (Range of adjustment: + 5° - − 5°) 1) Loosen the hex socket head cap bolt 1 beside the “B” mark on the left side of the adjusting unit. 2) Adjust the forward/backward position by rotating the adjusting knob 2 on the left side of the top surface of the adjusting unit.
- Page 17 Installation (continued) ■ If the projected image is tilted to the left or to the right Right/left tilt adjustment (Range of adjustment: + 5° - − 5°) 1) Loosen the hex socket head cap bolt 1 on the right front of the adjusting unit. 2) Adjust the right/left tilt by rotating the adjusting knob 2 on the right side of the top surface of the adjusting unit.
-
Page 18: Specifications
Specifications Forward/backward sliding distance 275 mm (10-13/16") Upward/downward angle + 4° - −2° Range of Horizontal rotation angle ±5° adjustment Forward/backward tilt angle ±5° Horizontal tilt angle ±5° Width: 463 mm (18-7/32") × Dimensions Height: 243.5 mm (9-19/32") × Depth: 710.7 mm (27-31/32") Weight Approx. - Page 19 MEMO ENGLISH - 19...
- Page 20 SG0113HO1063 -FJ Printed in China...
Need help?
Do you have a question about the ET-PKC200W and is the answer not in the manual?
Questions and answers