Page 1
Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time. English Deutsch Español Italiano Português Français Nederlands 1402035 ES-A23391G-1...
Apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection. (75") Figures and illustrations in this manual are provided for reference only and may differ from actual product appearance. Parts of the software function changes with the system upgrade. Find what you want This TV is equipped with a user manual and embedded E-Manual (Settings >...
Follow all instructions Heed all warnings Keep these instructions All rights reserved. Hereby, Hisense Visual Technology Co., Ltd. declares Authorized EU Representative that the radio equipment type is in compliance Name: Gorenje gospodinjski aparati, d.o.o. with Directive 2014/53/EU and Radio Equipment Address: Partizanska cesta 12, 3320 Regulations 2017 of UK.
Page 4
The intended use and ambient conditions for this TV This TV is intended for the rendering of video and audio signals, on a table-top or wall- mounted, in a home or office environment. It must not be used in rooms with a high level of humidity or dust concentration.
Page 5
Moving/Transportation when disconnecting. The cable can become damaged and cause a short Before moving this TV, disconnect all cables circuit if pulled on. and move in the vertical position only. Grasp - Do not place the power cable near a the device on the upper and lower edges of high temperature object.
Page 6
- Take care not to touch the ventilation occur on the black areas. Image burn is not openings since they may become hot. covered by the warranty. - Do not insert foreign objects into the TV - Do not apply strong force or impact on through the vents.
Page 7
the fumes from the off-gassing will diminish - The surface of the display panel is eventually. treated and may be easily damaged. Take care not to scratch it with fingernails or other hard objects. Supervision - Also wipe the power plug with a dry cloth - Do not let children play unsupervised at regular intervals.
Installing the Stand or Wall Mount Bracket CAUTION Be sure to disconnect the AC power cord before installing a stand or wall mount brackets. The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure.
Installing the wall mount bracket Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV. CAUTION When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If it is not correctly mounted, the TV may fall and cause property damage or personal injury.
TV Front and Rear AC INPUT Power indicator/ Power button (Standby/Source) DIGITAL AUDIO OUT Item Description The light is white in standby mode. If you want to turn off the power indicator light, please Power indicator select Settings > System > Advanced Settings > Power Indicator to disable it.
Connection Terminals Audio Amplifier/Speaker DIGITAL AUDIO OUT ANT OUT ANT 1 DVB-T/T2/C Audio Amplifier/Speaker HDMI HDMI (eARC) DVD/Blu-Ray/AV receiver/ Set-top Box ANT 2 HDMI DVB-S/S2 HDMI HEADPHONE NOTE Excessive sound pressure from earphones and headphones can cause hearing loss. Red(R) VCR/DVD Player/ Recorder/Set-top box/ White(L)
LAN (Wired setup) Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below. · It is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP).
Remote Control Buttons of remote control BUTTON DESCRIPTION Power on/Standby Select input sources Number button Select a channel or input numbers Four colour buttons Special function buttons GUIDE Display the Electronic Program Guide (DTV mode) CH.LIST Display the Channel List on the screen Playpad keys Press to enter Menu ˄...
Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
Other Information Recycling/Licenses WEEE (Waste Electronic Electric Equipment) European Directive 2012/19/EU This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Need help?
Do you have a question about the 55U6NQ and is the answer not in the manual?
Questions and answers