Configuring Bios Setup; Vendor/Product Id For Windows 2000 Professional Setup - IBM 4951-514 Installation Manual

Figure 1. System information window
5. Save TXTSETUP.SIF and exit the text editor.

Configuring BIOS setup

1. Power on the system and enter BIOS setup by pressing the <DEL> key during
2. Enter the Advanced BIOS Features menu.
3. Under the Boot Device selections, make the following changes:
4
SurePOS 500 Series : Operating System Installation Guide - SurePOS 500 Model 514
c. Record the value for the PNP Device ID of your new device.
d. Enter the Vendor and Product ID into the TXTSETUP.SIF file using the
following format:
"MatchingDeviceId" = "usbstor" ;Drive Description
Table 2. Vendor/product ID for Windows 2000 Professional setup
"MatchingDeviceId"
= "usbstore"
;Drive Description
POST, or by tapping the touch screen twice when prompted during POST.
v First Boot Device = USB-FDD
v Second Boot Device = HDD-0
Value from PNP Device ID
Leave as is, including quotes and spaces
May be any text you like to identify your
device.