To Select The External Input; Counter Reset - Memorex MVD4544 - DVD/VCR User Manual

TO START PLAYBACK
If the unit is in DVD mode, press the VCR/DVD button (on the main unit) or VCR Button (on the
remote) to change the unit to VCR mode.
1
Press the POWER button to turn on the unit and load a
prerecorded tape.
TO STOP PLAYBACK
1
Press the STOP button, the tape will stop, but remain
fully loaded and ready to play.

TO SELECT THE EXTERNAL INPUT

1
Press the AV1 1 or AV2 2 button to select the desired input
(AV1 (rear A/V jacks) or AV2 (front A/V jacks).
VCR OPERATION (CONTINUED)
1
2
1
1
2
Press the PLAY/PAUSE ®P button to begin playback.
NOTE: If you are in VCR mode, when playback reaches
the end of the tape, it will stop. Then the tape will be
rewound automatically to the beginning.

COUNTER RESET

1
During playing of a cassette tape, press the COUNTER
RESET/CLEAR button once to reset the counter to
0:00:00.
30