Vcr Operation; To Prevent Accidental Erasure - Memorex MVD4544 - DVD/VCR User Manual

LOADING
1
Push the center of the tape until it is automatically
retracted into the VCR.
AUTOMATIC POWER ON
The VCR will turn on automatically.
If the unit is in DVD mode, press the VCR/DVD button (on the main unit) or VCR Button (on the remote) to change the unit
to VCR mode, then press the PLAY/PAUSE ®P button to start tape playback.
UNLOADING
1
To unload a video cassette, press the EJECT button on the
unit or press the OPEN/CLOSE/EJECT button on the
remote control; the tape will stop and it will eject out.

TO PREVENT ACCIDENTAL ERASURE

1
After recording, break off the erase prevention tab if you
do not wish to record over the tape.
TO RECORD AGAIN
Cover the hole with vinyl tape.
Be careful the tape does not extend past the edges of the
video cassette housing.

VCR OPERATION

Erase Prevention Tab
2
When loading a cassette tape without the erase prevention tab
intact, press the PLAY/PAUSE ®P
playback. An inverted video cassette cannot be inserted.
2
Pull the cassette out.
The EJECT button can be pressed even when the power
is off and the tape will be ejected.
Always eject the tape when not in use.
TAPE SPEED AND MAXIMUM RECORDING TIME
1
Tape
Speed T-60
SP 1 hour
SLP 2 hours
Press the SP/SLP button to select the recording speed.
Speed selection is automatic during playback. The "SP"
mode is recommended for recording music programs.
29
button to begin
Cassette
T-120 T-180
2 hours 3 hours
4 hours 6 hours