AVIRA ANTIVIR UNIX WEBGATE User Manual page 71

In this window you can set the access and connections to specific ports for certain
Clients or networks.
Allow Enter the IP address of the Client you want to have access through WebGate and
client
press Add . If you want to enable a network, enter the IP address, followed by '/' and
address
the Bit number of the netmask. For example,
Allow Enter the ports, for which you want to allow the access through WebGate.
destination
port
Configuring WebGate
Log in as root .
Start WebGate GUI:
Define the basic settings in
Define the extended settings. If you are not sure about possible values (for
example, the maximum number of connections allowed), keep the default
value. You can modify and tune these values during operation or when eventual
conflicts occur.
If you are using WebGate with a proxy, make the
accordingly. You can read about the basic configurations in
Traffic
Set the parameters for scanning archives, if you want to activate this feature.
Select the malware types you want WebGate to detect.
Make the settings for the logfile and email messages in the area for
Settings
Press Save to keep the values you set.
70
192.168.1.0 or 192.168.1.0/24
/usr/lib/AntiVir/antivir-gui
– Page 26.
– Page 68.
The new settings are now activated.
AntiVir WebGate
Graphical User Interface (GUI)
Basic WebGate Settings – Page 63.
Proxy Settings – Page 66
Monitoring HTTP
Logfile
Avira GmbH