Table of Contents
Advertisement
Graphical User Interface (GUI)
Realtime view : to set the time interval of the graphic. It also has an option for
switching off the display ( View on / View off ).
Realtime View Window
See the figure in
Data
Displays the current memory load and its average value graphically and as text. To
throughput
expand or close the graphic display, you can slide the bar between the graphics and
the text area with the mouse pointer or you can use the red arrows.
Graphic view:
Horizontal axis: time intervals (available between 30 seconds and 3 minutes)
Vertical axis: 100% stands for the maximum number of connections multiplied
with KB pro connection, as set in configuration (see
Page 63). The y axis changes automatically according to the current value levels.
Table with description:
The text description is divided in five columns:
Computer: shows the name and the IP address of the currently scanned
computer. The text has the same color as the graphics.
Status: shows the status for every computer.
Connections: shows the current and the maximum allowed connections of the
computer.
Speed: shows the current data throughput of WebGate in Bytes/s. The value is
automatically updated.
Total: shows how many files have been loaded from the net since WebGate
started.
Current files
Shows the name of the computer, paths and names of the currently scanned files.
Last log entries
Displays the last three lines of the logfile. The entries are updated, every time
WebGate writes new lines in the logfile. The amount depends on the log level
settings.
Avira GmbH
Starting GUI
– Page 56
AntiVir WebGate
Basic WebGate Settings
–
59
Advertisement
Table of Contents
