1. Manuals
  2. Brands
  3. KYOWA Manuals
  4. Recording Equipment
  5. EDX-10A
  6. Instruction manual

KYOWA EDX-10A Instruction Manual

Compact recording system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Windows XP, Windows Vista, and Windows 7 are trademarks of the Microsoft Corporation, USA.
Generally, company names and trade names described in this Instruction Manual are trademarks or registered trademarks of
the companies.
This Instruction Manual may not be copied or reproduced, in whole or part, without consent of KYOWA.
Copyright © Kyowa Electronic Instruments Co., Ltd. All rights reserved.
The contents of the Instruction Manual are subjected to change without prior notice.
INSTRUCTION MANUAL
Compact Recording System
Thank you for purchasing KYOWA's product EDX-10A Compact Recording
System.
Read this Instruction Manual carefully in order to make full use of the high
performance capabilities of the product.
Do not use the product in methods other than described in this Manual.
This Manual only describes hardware operation of the EDX-10A. For the
Dynamic Data Recording Software DCS-100A, see the DCS-100A Instruction
Manual (For EDX-10A Operation).
IM-A-934c November, 2012
EDX-10A
(FOR HARDWARE)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDX-10A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for KYOWA EDX-10A

Summary of Contents for KYOWA EDX-10A

  • Page 1 Generally, company names and trade names described in this Instruction Manual are trademarks or registered trademarks of the companies. This Instruction Manual may not be copied or reproduced, in whole or part, without consent of KYOWA. Copyright © Kyowa Electronic Instruments Co., Ltd. All rights reserved.

  • Page 3: Table Of Contents

    SAFETY PRECAUTIONS (Do not forget to read the safety precautions prior to use.） ..........3 LIMITED LIFE PARTS AND PREVENTIVE MAINTENANCE ................. 6 EDX-10A REPLACEMENT BEFORE THE END OF SERVICE LIFE ................ 6 NOTATIONS USED IN THE INSTRUCTION MANUAL .................... 6 IMPORTANT PRECAUTIONS WHEN USING EDX-10A ...................

  • Page 4: Standard Accessories

    This Manual only describes hardware operation of the EDX-10A. STANDARD ACCESSORIES The following accessories are packed with the EDX-10A. When unpacking, check the contents to ensure that all accessories are enclosed. ･･････ DYNAMIC DATA RECORDING SOFTWARE DCS-100A: 1 (CD-R) ･･･････････････････････････････････････...

  • Page 5: Safety Precautions

    Be sure to connect the GND terminal. Or, it may cause electric shock, lower the performance and cause trouble.  Avoid using in environment with inflammable gas, etc. To prevent the risk of fire hazard or explosion, do not use the EDX-10A in environment with inflammable gas, vapor, or dust.  If any trouble occurs To prevent fire hazards, if smoke is emerging from the EDX-10A, immediately disconnect the USB cable or AC adapter to terminate the system operation.
  • Page 6 196.1m/s (20G)/11msec Use the EDX-10A in an area where vibration and impact can be kept within the scope of specifications. Continuous vibration or severe impact may cause deteriorated performance and system failure.  Do not use the EDX-10A in strong electromagnetic field.
  • Page 7 CAUTION ●Handle the CD-R with care. Do not expose the CD-R to direct sun light, high temperature, or high humidity. Do not apply pressure to the CD-R by laying object or bending. Handle with care to avoid any fingerprint, dirt, scratch on both sides.

  • Page 8: Limited Life Parts And Preventive Maintenance

    EDX-10A. Regardless of the replacement parts, the EDX-10A itself gradually deteriorates with age. Before the expected service life is reached, consider replacing the EDX-10A with a new one or the latest series as preventive maintenance.

  • Page 9: Important Precautions When Using Edx-10A

    2. Do not connect multiple EDX-10A units to one PC. You can connect one EDX-10A per one PC. 3. When using the USB bus power, be sure to connect one measuring unit to the EDX-10A. Do not connect multiple measuring units.

  • Page 10: Outline Of The Product

    1-1. OUTLINE OF THE PRODUCT The EDX-10A is small and lightweight measuring instrument. Measuring units can be connected easily. The EDX-10A can execute small-scale measurement of up to 16 channels by connecting 4 measuring units in synchronous operation. When connecting one measuring unit, the EDX-10A offers additional convenience for measurements because they are powered from the USB interface and do not require a separate power supply.

  • Page 11: Controls And Indicators

    For fixing the EDX-10A and measuring unit by using a screw. (6) Finger slot For connecting/disconnecting the EDX-10A and a measuring unit. (7) Rubber foot slot The EDX-10A has small rubber feet (optional) to keep it from sliding around when placed on a flat surface.

  • Page 12: Bottom

    With Cap With no Cap (10) (8) Rubber foot slot The EDX-10A has small rubber feet (optional) to keep it from sliding around when placed on a flat surface. (9) Cap Cap for protecting the unit-coupling connector on the EDX-10A bottom.

  • Page 13: Connection And Default Setting

    3-1. PROCEDURES FOR MEASUREMENTS This section describes necessary operations to be conducted prior to the actual measurements. Section 3-2 Connect the measuring units Connect the measuring units to the EDX-10A. ↓ Section 3-3 Connect the optional AC Connect the optional AC adapter.

  • Page 14: Connect The Measuring Units

    (1) Remove the cap on the EDX-10A bottom. Remove the cap. (2) Connect the unit-coupling connector on the EDX-10A bottom and connector on the measuring unit top. Use the finger slots to connect the EDX-10A and a measuring unit. EDX-10A Use the finger slot to grab the EDX-10A.

  • Page 15: Connect The Optional Ac Adapter

    When connecting 2 to 4 measuring units, be sure to use the optional AC adapter. (1) Connect the DC plug of the optional AC adapter into the [DC IN] connector of the EDX-10A. (2) Connect the optional AC adapter into the AC power outlet.

  • Page 16: Installing The Usb Device Driver

    3-5. INSTALLING THE USB DEVICE DRIVER Install the USB device driver into the PC before using the USB interface. This section describes how to install the USB device driver. NOTE When installing the USB device driver, log in with an administrator account. Enter the Administrator password.

  • Page 17: Connecting The Usb Interface

    3-6. CONNECTING THE USB INTERFACE 3-6-1. Connect the USB cable (1) Connect the B connector of the USB cable into the [USB] connector of the EDX-10A. (2) Connect the A connector into the USB port of the PC. (3) Make sure the LED lights up in green after starting up the Dynamic Data Recording Software DCS-100A.
  • Page 18 NOTE When connecting multiple EDX-10A units to one PC, you cannot use them. You cannot use the You cannot use the EDX-10A. EDX-10A.

  • Page 19: Measure Data

    Software DAS-200A. 4-2. EDX-10A POWER ON/OFF The EDX-10A power ON when the USB cable is connected and power OFF when the USB cable is disconnected. To turn OFF the EDX-10A after measurements, disconnect the USB cable after disconnecting the optional AC...

  • Page 20: Trouble Shooting

    5. TROUBLE SHOOTING When the EDX-10A does not operate as expected or when it operates unstably, trace the cause before concluding a defect of EDX-10A. Items to be checked and countermeasure against various phenomena are described in the following table.

  • Page 21: Maintenance

    The replacement frequency of limited-life parts is about five years, assuming eight hours of use, 365 days a year. The above figure is only a rough indication. We do not promise or guarantee that the EDX-10A is error-free or will be repaired at no additional cost in the above period.

  • Page 22: Specifications

    7. SPECIFICATIONS 1) Interface Compliant to the USB specification 2.0 Connector: USB standard-B receptacle 2) The number of measuring units Maximum 4 measuring units (maximum 16 channels) 3) Sampling frequency 1Hz to 20kHz: The number of channels 1 to 4 1Hz to 10kHz: The number of channels 5 to 8 1Hz to 5kHz:...

  • Page 23: Outside Drawing

    8. OUTSIDE DRAWING 8-1. EDX-10A Unit: mm...

  • Page 24: When Connecting Four Edx-11A Units

    8-2. WHEN CONNECTING FOUR EDX-11A UNITS Unit: mm...

Table of Contents