1. Manuals
  2. Brands
  3. KYOWA Manuals
  4. Recording Equipment
  5. EDX-10B
  6. Instruction manual

KYOWA EDX-10B Instruction Manual

Compact recording system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
Generally, company names and trade names described in this Instruction Manual are trademarks or registered trademarks of
the companies.
This Instruction Manual may not be copied or reproduced, in whole or part, without consent of KYOWA.
Copyright © Kyowa Electronic Instruments Co., Ltd. All rights reserved.
The contents of the Instruction Manual are subjected to change without prior notice.
We assume no responsibility whatever for any damage resulting from the use of this product.
INSTRUCTION MANUAL
Compact Recording System
Thank you for purchasing KYOWA's product EDX-10B Compact Recording
System.
Read this Instruction Manual carefully in order to make full use of the high
performance capabilities of the product.
Do not use the product in methods other than described in this Manual.
This Manual only describes hardware operation of the EDX-10B. For the
Dynamic Data Recording Software DCS-100A, see the DCS-100A Instruction
Manual (For EDX-10A/B Operation).
IM-A-1068 December, 2015
EDX-10B
(FOR HARDWARE)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EDX-10B and is the answer not in the manual?

Questions and answers

Related Manuals for KYOWA EDX-10B

Summary of Contents for KYOWA EDX-10B

  • Page 1 Generally, company names and trade names described in this Instruction Manual are trademarks or registered trademarks of the companies. This Instruction Manual may not be copied or reproduced, in whole or part, without consent of KYOWA. Copyright © Kyowa Electronic Instruments Co., Ltd. All rights reserved.

  • Page 3: Table Of Contents

    SAFETY PRECAUTIONS (Do not forget to read the safety precautions prior to use.） ...... 3 LIMITED LIFE PARTS AND PREVENTIVE MAINTENANCE ........6 EDX-10B REPLACEMENT BEFORE THE END OF SERVICE LIFE ........6 NOTATIONS USED IN THE INSTRUCTION MANUAL ..........6 IMPORTANT PRECAUTIONS WHEN USING EDX-10B ..........

  • Page 4: Standard Accessories

    This Manual only describes hardware operation of the EDX-10B. STANDARD ACCESSORIES The following accessories are packed with the EDX-10B. When unpacking, check the contents to ensure that all accessories are enclosed. ･･････ DYNAMIC DATA RECORDING SOFTWARE DCS-100A: 1 (CD-R) ･･･････････････････････････････････････...

  • Page 5: Safety Precautions

    Be sure to connect the GND terminal. Or, it may cause electric shock, lower the performance and cause trouble.  Avoid using in environment with inflammable gas, etc. To prevent the risk of fire hazard or explosion, do not use the EDX-10B in environment with inflammable gas, vapor, or dust.  If any trouble occurs To prevent fire hazards, if smoke is emerging from the EDX-10B, immediately disconnect the USB cable or AC adapter to terminate the system operation.
  • Page 6 294m/s (30G)/11msec Use the EDX-10B in an area where vibration and impact can be kept within the scope of specifications. Continuous vibration or severe impact may cause deteriorated performance and system failure.  Do not use the EDX-10B in strong electromagnetic field.
  • Page 7 Handle with care to avoid any fingerprint, dirt, scratch on both sides. ● Cleaning. When the product gets dirty, clean the product with a dry soft cloth. When dust exists inside the EDX-10B, clean it by using an air blow gun. Do not touch electronic parts.

  • Page 8: Limited Life Parts And Preventive Maintenance

    EDX-10B. Regardless of the replacement parts, the EDX-10B itself gradually deteriorates with age. Before the expected service life is reached, consider replacing the EDX-10B with a new one or the latest series as preventive maintenance. NOTATIONS USED IN THE INSTRUCTION MANUAL...

  • Page 9: Important Precautions When Using Edx-10B

    Or, it will cause data corruption and other problems 2. Do not connect multiple EDX-10B units to one PC. You can connect one EDX-10B per one PC. 3. When using the USB bus power, number of connectable measuring unit will change by USB standard and type of measuring unit.

  • Page 10: Outline Of The Product

    1-1. OUTLINE OF THE PRODUCT The EDX-10series are small and lightweight measuring instrument. Measuring units can be connected easily. The EDX-10B can execute small-scale measurement of up to 16 channels by connecting 4 measuring units in synchronous operation. When connecting low power measuring unit, maximum 16 channels with 4 measuring unit can operate on USB bus power.

  • Page 11: Controls And Indicators

    For fixing the EDX-10B and measuring unit by using a screw. (6) Finger slot For connecting/disconnecting the EDX-10B and a measuring unit. (7) Rubber foot slot The EDX-10B has small rubber feet (optional) to keep it from sliding around when placed on a flat surface.

  • Page 12: Bottom

    With Cap With no Cap (10) (8) Rubber foot slot The EDX-10B has small rubber feet (optional) to keep it from sliding around when placed on a flat surface. (9) Cap Cap for protecting the unit-coupling connector on the EDX-10B bottom.

  • Page 13: Connection And Default Setting

    3-1. PROCEDURES FOR MEASUREMENTS This section describes necessary operations to be conducted prior to the actual measurements. Section 3-2 Connect the measuring units Connect the measuring units to the EDX-10B. ↓ Section 3-3 Connect sensors Connect various sensors to the measuring units.

  • Page 14: Connect The Measuring Units

    The number of connectable measuring units is change by type of power and type of measuring units. ・When used optional AC adapter. When used optional AC adapter, the number of connectable measuring units is 4 units. EDX-10B Up to 4 units at any of measuring units ・When used USB bus power.

  • Page 15: How To Connect The Measuring Unit

    (1) Remove the cap on the EDX-10B bottom. Remove the cap. (2) Connect the unit-coupling connector on the EDX-10B bottom and connector on the measuring unit top. Use the finger slots to connect the EDX-10B and a measuring unit. EDX-10B Use the finger slot to grab the EDX-10B.

  • Page 16: Connect The Optional Ac Adapter

    3-4. CONNECT THE OPTIONAL AC ADAPTER Please connect the optional AC adapter. If you use the optional AC adapter, EDX-10B can connected four measuring units. *If you want to use USB bus power, plese go to 3-5.INSTALLING THE USB DEVICE DRIVER.

  • Page 17: Installing The Usb Device Driver

    (5) Follow the instruction on screen. Finish button appears when the setup completes. (6) Please connect the PC to EDX-10B by USB cable. Installation of the USB driver will start. For details, see Instruction Manual (FOR USB DRIVER SET UP) , which is in the same folder.

  • Page 18: Connecting The Usb Interface

    3-6. CONNECTING THE USB INTERFACE 3-6-1. Connect the USB cable (1) Connect the B connector of the USB cable into the [USB] connector of the EDX-10B. (2) Connect the A connector into the USB port of the PC. (3) Make sure the LED lights up in green after starting up the Dynamic Data Recording Software DCS-100A.

  • Page 19: Wiring Diagram Of The Usb Interface

    USB specification 2.0 connector NOTE EDX-10B can connect max four measuring unit when using AC adapter. Be sure to use AC adapter when using USB hub, and USB cable length must be less than 5 m including an USB hub.
  • Page 20 (3) When connecting the PC and EDX-10B directly. (Use USB bus power) When you use USB bus power (USB specification 3.0 ) B connector USB cable A connector Use the high-speed USB hub compliant to the USB specification 3.0 When you use USB bus power (USB specification 3.0 )

  • Page 21: Measure Data

    4-2. EDX-10B POWER ON/OFF The EDX-10B power ON when the USB cable is connected and power OFF when the USB cable is disconnected. To turn OFF the EDX-10B after measurements, disconnect the USB cable after disconnecting the optional AC adapter.

  • Page 22: Trouble Shooting

    5. TROUBLE SHOOTING When the EDX-10B does not operate as expected or when it operates unstably, trace the cause before concluding a defect of EDX-10B. Items to be checked and countermeasure against various phenomena are described in the following table.

  • Page 23: Maintenance

    The replacement frequency of limited-life parts is about five years, assuming eight hours of use, 365 days a year. The above figure is only a rough indication. We do not promise or guarantee that the EDX-10B is error-free or will be repaired at no additional cost in the above period.

  • Page 24: Specifications

    7. SPECIFICATIONS Name Control Unit Model EDX-10B Interface Compliant to USB specification 2.0 Connector types: USB standard-B receptacle Number of measurement units Up to 4 units by 16 channels 1 Hz ～ 20 kHz (The number of channels 1 to 4) Sampling frequency 1 Hz ～...

  • Page 25: Outside Drawing

    8. OUTSIDE DRAWING 8-1. EDX-10B Unit: mm...

  • Page 26: When Connecting Four Edx-11A Units

    8-2. WHEN CONNECTING FOUR EDX-11A UNITS Unit: mm...
  • Page 27 Kyowa Electronic Instruments Co., Ltd. 3-5-1, Chofugaoka, Chofu, Tokyo 182-8520 Japan http://www.kyowa-ei.com/...

Table of Contents