Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LightSpeed Technologies EX100-EARC-KIT
Summary of Contents for LightSpeed Technologies EX100-EARC-KIT
- Page 1 Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 User Manual...
-
Page 2: Table Of Contents
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Contents Introduction ............................ 3 Overview ............................3 Features............................3 Package Contents ..........................3 Specifications ..........................4 Transmission Distance ........................4 Panel Descriptions ........................... 5 Transmitter ............................5 Receiver ............................6 Installation and Wiring ........................8 Installation ............................ -
Page 3: Introduction
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Introduction Overview This product is an eARC audio-only extender kit. It can transmit eARC/ARC or alternative S/PDIF audio up to 100m/330ft from the TV back to centralized AVR. The kit supports full eARC capabilities up to Dolby Atmos. It also supports full eARC function and is backward compatible with 5.1CH ARC. -
Page 4: Specifications
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Specifications Technical Transmitter: 1 x HDMI OUT, 1 x UTP OUT, 1 x S/PDIF IN, 1 x IR IN, 1 x IR OUT, 1 x RS232, 1 x Micro USB (for power input) -
Page 5: Panel Descriptions
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Panel Descriptions Transmitter Front Panel Name Description POWER LED On/Off: The device is powered on/off. On: UTP link is normal. LINK LED Off: No UTP link or link error. On: The eARC audio is being transmitted. -
Page 6: Receiver
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Receiver Front Panel Name Description POWER LED On/Off: The device is powered on/off. On: UTP link is normal. LINK LED Off: No UTP link or link error. On: The eARC audio is being transmitted. -
Page 7: Installation And Wiring
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Installation and Wiring Installation Warnings: Before wiring, disconnect the power from the device. During wiring, connect and disconnect the cables gently. Steps to install the device: 1. Attach the installation bracket to the enclosure using the screws provided in the package separately. -
Page 8: Wiring
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Wiring Warnings: Before wiring, disconnect the power from all devices. During wiring, connect and disconnect the cables gently. Note: Ensure the connected display support eARC/ARC function and its CEC function should be set to enable. - Page 9 Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 For additional wiring: Bi-directional IR pass-through: Connect the provided IR receiver to IR IN port of the transmitter/receiver, and connect the provided IR emitter to IR OUT port of the receiver/transmitter. You can control the display at receiver side or control the AV receiver at transmitter side.
- Page 10 Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Figure 1 eARC / ARC Channel Receiver Remote Display IR Receiver eARC/ARC Transmitter Cat 5e/6 or above Receiver IR emitter eARC/ARC AV Receiver Available exclusively from Future Ready Solutions www.lightspeed-tech.com Email: info@lightspeed-tech.com Phone: 239.948.3789...
- Page 11 Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 Figure 2 S/PDIF Channel Display Receiver Remote IR Receiver S/PDIF Transmitter Cat 5e/6 or above Receiver S/PDIF IR emitter AV Receiver Available exclusively from Future Ready Solutions www.lightspeed-tech.com Email: info@lightspeed-tech.com Phone: 239.948.3789...
-
Page 12: Dip Switch Settings
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 DIP Switch Settings Before powering on the kit, using DIP Switch on front panel of the transmitter to select the channel to output the eARC/ARC audio. Please refer to the following table to set:... -
Page 13: Rs232 Pass-Through
Audio-Only Extender LightSpeed EX100-EARC-KIT Version: V2.0 RS232 Pass-Through RS232 ports can be used for bi-directional RS232 signal pass-through between the transmitter and receiver. RS232 Device Transmitter RS232 Port Connected RS232 Device Pins Cat x Receiver RS232 Device Available exclusively from Future Ready Solutions www.lightspeed-tech.com...
Need help?
Do you have a question about the EX100-EARC-KIT and is the answer not in the manual?
Questions and answers