Subscribe to Our Youtube Channel
Related Manuals for LightSpeed Technologies 4K-40M-ADV-KIT
Summary of Contents for LightSpeed Technologies 4K-40M-ADV-KIT
- Page 1 HDMI, IR & RS232 over Twisted Pair Extender Set PN: 4K-40M-ADV-KIT Version: V1.2.0 Installation & Specification Guide...
-
Page 2: Package Contents
Supports bi-directional power (PoC compatible) from either the receiver or transmitter Slim chassis with optional mounting brackets for easy installation *Note: The 4K-40M-ADV-KIT supports Dolby Vision only if the data rate is less than or equal to 10.2Gbps. Package Contents •... -
Page 3: Typical Application Diagram
HDMI, IR & RS232 over Twisted Pair Extender Set Version: V1.2.0 Typical Application Diagram TV Remote Blu-ray Player Broadband HDMI IN • IR Receiver 2 IR Emitter 1 Transmitter HDBT OUT Cat X cable Receiver HDBT IN Broadband IR Emitter 2 HDMI OUT IR Receiver 1 Blu-ray Player Remote... -
Page 4: Specifications
HDMI, IR & RS232 over Twisted Pair Extender Set Version: V1.2.0 Specifications Video Input/Output Signal Type HDMI 2.0, HDCP 2.2, HDR, 3D Input/Output Resolution Up to 4096x2160@60Hz, including Supported 4K@60Hz/4K@30Hz/1080P/1080I/720P 4K: 8/10/12 bit Deep color 1080P: up to 16 bit Maximum Data Rate 18 Gbps Maximum Pixel Clock... -
Page 5: Panel Descriptions
HDMI, IR & RS232 over Twisted Pair Extender Set Version: V1.2.0 Panel Descriptions Transmitter & Receiver Front Panels 1 2 3 4 Name Description POWER On: The device is powered on Off: The device is powered off STATUS Blinking: The device is working properly Off: The device is not active or not working properly On: HDCP protected content is being transmitted HDCP... - Page 6 HDMI, IR & RS232 over Twisted Pair Extender Set Version: V1.2.0 Receiver Rear Panel Name Description Power adapter port (extender kit only DC 18V requires power supply on transmitter or receiver) HDBT IN Twisted pair cable connection port IR IN IR receiver port IR OUT IR emitter port...
- Page 7 Version: V1.2.0 RS232 Operation • G = Ground • RX = Receive • TX = Transmit The 4K-40M-ADV-KIT supports bi-directional RS232 control when connected to RS232-enabled devices and control systems via the Phoenix-style connector. Three pins are present: RS232 Device RS232...
- Page 8 HDMI, IR & RS232 over Twisted Pair Extender Set Version: V1.2.0 Troubleshooting 1. No Power • Ensure the power is on. • Ensure the power adapter provided in the package is connected to either the transmitter or receiver • If power is present on one end only (either the transmitter or receiver), verify the twisted pair cable is connected and terminated according to T568B straight-through standards.
Need help?
Do you have a question about the 4K-40M-ADV-KIT and is the answer not in the manual?
Questions and answers