Table of Contents
Advertisement
Detailed instructions
3
Make the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 34.
4
End the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 34.
Note
Entering phone number mode cannot be oper-
ated unless a Bluetooth telephone is connected
to this unit.
Setting the private mode
(Function of AVH-P4400BH/AVH-P3400BH/
AVH-P2400BT)
During a conversation, you can switch to pri-
vate mode (talk directly on your cellular
phone).
Refer to Introduction of Bluetooth telephone op-
erations on page 34.
Using a cellular phone to
initiate a connection
(Function of AVH-P1400DVD)
A Bluetooth wireless connection can be estab-
lished from your phone by putting the unit into
initiating a connection mode.
You may need to refer to the operation manual
that came with your phone if you are unsure
how to initiate a connection from your phone.
1
Put the unit in initiating a connection
mode.
Refer to Introduction of Bluetooth telephone op-
erations on page 36.
2
Use a cellular phone to connect to this
unit.
# Operation varies depending on the type of cel-
lular phone.
# You may need to enter the link code on your
cellular phone to complete the connection.
Registering a connected
cellular phone
(Function of AVH-P1400DVD)
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with
Bluetooth wireless technology. Only one cellu-
lar phone can be registered.
1
Start registering a connected cellular
phone.
Refer to Introduction of Bluetooth telephone op-
erations on page 36.
2
Use cellular phone to register to this
unit.
If registration is successful, the device name
of the connected phone is displayed in the se-
lected assignment.
# If the assignment is already taken, the device
name will be displayed. To replace an assignment
with a new phone, first delete the current assign-
ment.
# If registration failed, the device name of the
connected phone will not be displayed in the se-
lected assignment. In such cases, return to step
1 and try again.
Voice recognition
(Function of AVH-P1400DVD)
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
1
Start voice recognition.
Refer to Introduction of Bluetooth telephone op-
erations on page 36.
2
Say the name of your contact aloud.
Section
14
55
En
Hide quick links:
Advertisement
Table of Contents
