Connecting The Power Cord - Pioneer AVH-P3400BH Owner's Manual

Section
17 Installation

Connecting the power cord

Navigation system
(AVIC-U220(sold
separately))
Please contact your
dealer to inquire about
the connectable
navigation unit.
Yellow
Connect to the constant 12 V supply terminal.
Orange/white
Connect to lighting switch terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Front speaker
Left
Rear speaker or
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything to Green and Green/black leads.
80
En
26 pin cable (Supplied with navigation unit)
Insert the 26 pin cable in the direction
indicated in the figure.
This product
Antenna input
Fuse (10 A)
AUX jack (3.5 ø) (AVH-P4400BH only)
Use a mini plug cable to connect with auxiliary device.
White


White/black
Green


Green/black
Green
Not used.
Green/black
RGB input
Gray


Gray/black
Violet


Violet/black

Violet

Violet/black
Front speaker
Right
Rear speaker or
Subwoofer (4 Ω)
Subwoofer (4 Ω)
× 2