Controller; System Setup - Nintendo GAMECUBE - Game Console Instruction Booklet

1• COMPONENTS
Nintendo GameCube Controller
L Button
Start/
Pause
Control
Stick
+Control
Pad

Controller

Plug
NOTE: If the L or R Buttons are pressed or the Control Stick or C Stick are moved out of neutral
position when the power is turned ON, those positions will be set as the neutral position,
causing incorrect game control during game play.
To reset the controller, release all buttons and sticks to allow them to return to the correct neutral
position, then hold down the X, Y and START/PAUSE Buttons simultaneously for 3 seconds.
Control Stick
neutral position
NOTE: On specially designed games, the Game Boy
(sold separately, see back cover for purchasing information) can be connected directly to the
Nintendo GameCube for use as an additional game screen and/or controller. Please check
Nintendo GameCube software packaging for availability of this feature.
6
R Button
Z Button
Y Button
X Button
A Button
B Button
C Stick
C Stick
neutral position
®
Advance handheld video game system
Connecting the AC Adapter and Controller
IMPORTANT: Please review the Hardware
1
Precautions/Maintenance section of the
separate Precautions Booklet included
with this product before setting up the
Nintendo GameCube.
Insert the DC Jack into the DC Input
Connector on the back of the console.
(Illustration 1)
Insert the Controller Plug into the Controller
2
Socket on the front of the console. See the
instruction booklet for the game you are
playing to find out which socket(s) you need to
plug the controller(s) into. (Illustration 2)
IMPORTANT: Please review the TV Screen Damage Caution in the separate Precautions
3
Booklet included with this product before connecting the Nintendo GameCube to a TV.
Connect the Nintendo GameCube to your TV or VCR.
Refer to the following pages to setup your system with your specific equipment:
• Connecting to a Stereo TV or VCR
• Connecting to a Mono TV or VCR
• Connecting to a TV or VCR without Audio/Video Connections (RF connection)
Insert the AC Plug from the AC Adapter into a
4
120V AC wall outlet. (Illustration 3)
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot and
insert fully into outlet.
2 • SYSTEM SETUP
1
2
Pages 8-9
Page 10
Page 11
3
7