The driver will not detect a valid sync signal until the correct signal type is configured
in the NVIDIA Control Panel.
Understanding the Status Indicators
The LEDs on the NVIDIA SDI Output Card connector bracket indicate the status of the
SDI outputs and the synchronization input signals.
Figure 3.1 SDI Connection LED Indicators
The activity of the LEDs indicates the signal status as follows:
FILL or KEY Out
Status
Meaning
Off (gray)
SDI output is not in use
Steady Green
SDI output has power.
Blinking Green
SDI output is active.
Input
Status
Meaning
Off (gray)
SDI input synchronization is disabled.
Blinking Green
Valid SDI synchronization signal is detected.
Quadro 4000/5000/6000 SDI
Chapter 03 : Windows–Using the Graphics to SDI Control Panel
FILL KEY INPUT
SDI Output Card LEDs
DU-05337-001_v01
|
19