Nvidia FX4500 - Apple MAC Pro QUADRO FX 4500 Video Card 630-7532 User Manual page 21

4
Click the SDI Settings bar to open the SDI Signal Settings dialog box.
5
Choose a method for determining the format of the SDI output ‐ either using internal
timing or synchronized to an external signal source.

To use internal timing, select Free running (internal timing), then click the list
arrow and choose from the list of available SDI signal formats.

To synchronize to an external signal source, make sure the house sync is connected to
the INPUT BNC connector on the graphics card, then select the Synchronized to a
house sync signal radio buttion and set up the synchronization and signal formats
as follows:
•
Select the House sync type radio button (SDI or Composite) that corresponds to
the sync signal type you are using.
•
To synchronize the pixel scanning of the SDI output to the external signal using
genlock, select Pixel‐accurate synchronization.
•
To synchronize the frame rate of the SDI output to the external signal using frame
lock, select Frame‐accurate synchronization using this format, then click the
list arrow and choose from the list of available SDI signal formats.
•
To introduce a delay in the SDI output, enter the pixel or line delay values in the
appropriate HSYNC or VSYNC delay boxes.
Quadro 4000/5000/6000 SDI
Chapter 03 : Windows–Using the Graphics to SDI Control Panel
DU-05337-001_v01 | 17