JVC GY-DV300U - 1/3" 3-ccd Dv Camcorder Application Note page 2

5. Click on the '
PROP
6. From the 'Properties'
window that opens, click
.
CAST
7. You can change the HTTP
port from the window that
opens . Also, please take
note of the g lobal IP
address
(206.229.18.130:2170)
shown in the '
Internet URL
window. You will need to
know this later.
8. Once you've changed the
port, click 'OK' to close the
Cast window, and then
click 'OK' to close the
Properties window.
9. Start Streamcapture
casting by clicking the
' ' button and then the
VIEW
' ' button.
CAST CAM
You are now ready to create a Publishing Point for your Windows Media Server using Streamcapture. The
example below shows the setup sequence for Windows 2000 Server. Other operating systems should be similar.
1. Click ' ', then
Start
' ', then
Programs
'
Administrative Tools'
finally '
Windows Media
'Windows Media
Administrator, shown
below, opens.
2. From the Windows Media
Administrator, select
'Unicast Publishing Points'
as shown above.
3. In the 'Broadcast Unicast
Publishing Points' dialog
box (the lower of the two),
select 'Use wizard...'
4. Click on the Broadcast bar
and select 'New'. The wizard will make it easy
to configure the server for this application.
5. When asked, select 'Create a broadcasting
publishing point' and click 'Next'.
6. Select 'Remote Publishing Point' and click 'Next'.
? Page 2 of 4
' button to open the properties window.
'
and
'. The