Instant Milk Frother Manual
![]()
WHAT'S IN THE BOX
![Instant - Milk Frother - Product Overview Product Overview]()
Instant Milk Frother
Illustrations are for reference only and may differ from the actual product.
INITIAL SET UP
Before you begin creating your first at-home, café-style drink, follow these initial setup steps.
- Remove the Instant Milk Frother and all accessories out of the box.
- Remove all packaging materials from within and around the unit.
- Plug in the frother base into an earthed outlet.
- Follow the Initial cleaning steps before you begin frothing.
INITIAL CLEANING
It's important to clean the components before you begin frothing.
- Remove the lid from the pitcher, put it aside.
- Gently pull up on the frothing paddle at the bottom of the frothing pitcher.
- Hand wash and rinse the lid and frothing paddle with dish soap and warm water.
- Without immersing the pitcher in water, wash and rinse the inside of the frothing pitcher with dish soap and warm water.
- Dry the lid, frothing paddle and pitcher with a soft, dry cloth.
- Once dry, place the frothing paddle back into the pitcher by positioning the square end of the frothing paddle over the shaft at the bottom of the pitcher, and rotating the paddle until it aligns with the shaft, then push the paddle down until is secure.
Now you're ready to start making froth for your favourite drinks!
YOUR PRODUCT
Get familiar with your frother's controls and programmes.
![Instant - Milk Frother - Control Panel Control Panel]()
Control Panel
The Instant Milk Frother has a simple, two button-control panel.
Function
You can toggle between the programmes to create different types of foams, perfect for your drinks.
Start/Cancel
Starts and stops a selected programme.
Cold foam
Create cold, silky microfoam to top your cold brew.
![]()
Light, warm foam
This setting heats and froths milk for café au lait and matcha lattes.
![]()
Thick, warm foam
You can create thick, rich and warm foam, perfect for topping a cappuccino.
![]()
Warming
Heat your drink without creating foam. This setting slowly stirs the frothing paddle to keep your drink from burning. This setting is great for warming milk, creating hot chocolate and more.
![]()
USING YOUR APPLIANCE
Non-dairy milk
The Instant Milk Frother allows you to make both light and thick froth, warm or cold, with dairy and dairy-free milks. However, not all milk alternatives produce foam.
Use oat or soy milk when using the warm or cold foam setting. Coconut milk will only produce foam with the cold foam setting. Keep in mind that frothing dairy-free milks may not produce the same results as dairy milk.
How to froth milk
Always use the freshest, coldest milk or milk alternative possible for best results. When frothing large quantities of milk, allow the frother to rest for 3 minutes after every 2 frothing cycles.
- Ensure the froth paddle is securely in place at the bottom of the pitcher.
- Remove the lid from the pitcher and pour your choice of milk into the pitcher. Do not overfill the pitcher as this may cause the milk frother to overflow when using a foam setting.
- Place the lid on the pitcher and press down until secure.
- Place the pitcher onto the base.
- If the base is not plugged into an outlet, connect the plug into an outlet.
- Press Function to toggle between programmes.
- Press Start/Cancel to begin.
- To stop the programme at any time, press Start/Cancel. Otherwise, the milk frother will stop on its own when the programme ends.
Programmes run for a maximum of 3 minutes.
CARE/CLEANING/STORING
Clean your Instant Milk Frother after every use to ensure the best possible results, and to prevent milk residue from burning onto the inside of the pitcher.
Always unplug the milk frother and let it cool to room temperature before cleaning. DO NOT use metal scouring pads, abrasive powders or harsh chemical detergents to clean the milk frother or any of its components. Let all parts dry thoroughly before use or before storage.
Part | Cleaning method and instruction |
Lid | - Remove lid from pitcher before cleaning.
- Top-rack dishwasher safe.
|
Pitcher | - After use, let frother cool completely. Remove pitcher from the base before cleaning.
- With a cloth, hand wash the inside of the pitcher with hot water and dish soap. Then, rinse the inside of the pitcher with clean, warm water.
- With a damp cloth, hand wash the outside of the pitcher and wipe dry to prevent streaking. Let pitcher dry completely before placing pitcher back onto base.
- DO NOT rinse the pitcher's exterior.
- DO NOT store liquids in the pitcher.
|
Frothing paddle | - Remove from the pitcher before cleaning. Dishwasher safe.
|
Base | - Disconnect the base from outlet before cleaning.
- With a damp cloth, wipe visible particles from the base as needed.
- Allow to dry thoroughly before replacing the pitcher.
|
Power cord | - With a barely damp cloth, wipe visible particles from the power cord as needed.
- DO NOT fold the power cord when storing.
|
![burn hazard]()
![]()
![burn hazard]()
The pitcher and base contain electrical components. To avoid fire, electric shock or personal injury, DO NOT machine wash, rinse or immerse the milk frother base, pitcher, power cord or plug in water or other liquids.
IMPORTANT SAFEGUARDS
![burn hazard]()
![]()
![burn hazard]()
Read all instructions before using and only use this appliance as directed. Failure to follow these Important Safeguards may result in injury and/or property damage and will void your warranty.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons.
Placement
- DO operate the appliance on a stable, non-combustible, level surface.
- DO NOT place the appliance on or near a hot gas or electric burner, or in a heated oven.
- DO NOT let the power cord touch hot surfaces or open flame, including the stovetop.
- DO NOT connect appliance to an outlet below counter.
![]()
General Use
Spilled liquids from this frother can cause serious burns. Keep appliance and cord away from children. Never drape cord over edge of counter, never use outlet below counter, and never use with an extension cord. A short power-supply cord is used to reduce the risk resulting from it being grabbed by children, becoming entangled in, or tripping over a longer cord.
- DO NOT use this frother outdoors.
- DO NOT let the frother operate without milk.
- DO NOT use the appliance for anything other than its intended use. Not for commercial use.
FOR HOUSEHOLD USE ONLY
- DO regularly inspect the appliance and power cord.
- DO fill the pitcher with only water, milk or non-dairy milk alternatives. Never fill the pitcher with oil or other liquids.
- DO NOT leave the appliance exposed to sun, wind, and/or snow.
- DO operate and store the appliance above 0°C.
- DO NOT leave the appliance unattended when in use.
- DO NOT allow children to operate the appliance; close supervision is required when any appliance is used near children.
- DO NOT let children play with this appliance.
- To avoid the risk of personal injury or damage to property,DO NOT open the top cover during the foaming, frothing or warming process.
There are extremely hot liquids within the unit during the foaming, frothing and warming process. - DO NOT touch hot surfaces. Use handles or knobs.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
Care and Storage
- DO unplug from outlet when not in use before cleaning. Allow the appliance to cool before putting on or taking off parts, and before cleaning the appliance.
- DO NOT store any materials in the frother when not in use.
Plug
This appliance has an Earthed plug. To reduce the risk of electric shock:
- DO NOT attempt to modify the plug.
![]()
Electrical Warning
The unit contains electrical components that are an electrical shock hazard. Failure to follow these instructions may result in electric shock.
To protect against electrical shock:
- DO NOT use with power converters or adapters, timer switches or separate remote-control systems.
- DO disconnect the appliance by first pressing the Start/Cancel button, and then grasping the plug and pulling from the outlet. Never pull from the power cord.
- DO keep appliance and cord away from children.
![burn hazard]()
![shock hazard]()
To reduce the risk of fire or electric shock, DO NOT remove the bottom cover. No user-serviceable parts inside. Repair should be done by authorised service personnel only. - DO regularly inspect the appliance and power cord. DO NOT operate the appliance if the power cord or plug is damaged, or after the appliance malfunctions or is dropped or damaged in any manner. For assistance, contact Customer Care by email at UKSupport@instantbrands.com (if located in the UK) or EUSupport@instantbrands.com (if located in the EU) or by phone at +44 (0) 33312 30051.
![burn hazard]()
![shock hazard]()
DO NOT attempt to repair, replace or modify components of the appliance, as this may cause electric shock, fire or injury, and will void the warranty. - DO NOT tamper with any of the safety mechanisms, as this may result in injury or property damage.
To protect against electrical shock DO NOT immerse power cord, plug or the appliance the appliance in water or other liquid. - DO NOT use the appliance in electrical systems other than 220-240 V ~ 50-60 Hz.
- If a long detachable power-supply cord or extension cord is used:
- The marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance.
- The longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.
SAVE THESE INSTRUCTIONS
WARRANTY
Product Registration
Please visit instantbrands.co.uk/product-registration/ to register your appliance. You will be asked to provide your name, your email address, the store name, date of purchase, model number and serial number (both of which are found on the appliance). This registration will enable us to keep you up-todate with product developments and recipes, and contact you in the unlikely event of a product safety notification. By registering, you acknowledge that you have read and understood the instructions for use and warnings accompanying the appliance.
Warranty Service
To obtain warranty service, please contact our Customer Care Department by creating a support ticket online at Instantbrands.co.uk/support. If we are unable to resolve the problem, you may be asked to send your appliance to the Service Department for quality inspection.
When returning your appliance, please include your name, mailing address, email address, phone number, and proof of the original purchase date as well as a description of the problem you are encountering with the appliance.
Within the UK
Instant Brands (EMEA) Limited,
1 Christchurch Way, Woking,
Surrey, GU21 6JG, UK.
Email: UKSupport@instantbrands.com
Telephone: +44 (0) 3331 230051
Within the EU
Instant Brands (Ireland) Limited,
Suite 6, Rineanna House, Shannon
Free Zone, Shannon, Co Clare,
Ireland, V14 CA36.
Email: EUSupport@instantbrands.com
Telephone: +44 (0) 3331 230051
LEARN MORE
There's a whole world of Instant Milk Frother information and help just waiting for you. Here are some of the most helpful resources.
Register your product
instantbrands.co.uk/product-registration
Contact Consumer Care
instantbrands.co.uk/support/
UKSupport@instantbrands.com
EUSupport@instantbrands.com
+44 (0) 3331 230051
Replacement parts and accessories
instantbrands.co.uk/product-category/instant
Get started online with your new product!
![]()
Product specifications |
Model | Volume | Wattage | Power | Weight | Dimensions |
Instant Milk Frother | 296 mL | 500 watts | 220-240 V ~ 50-60 Hz | 0.79 kg | 22 H x 12 W x 15.5 D cm |
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Instant Milk Frother Manual
Need help?
Do you have a question about the Milk Frother and is the answer not in the manual?
Questions and answers