Download Print this page

Peakeep MHP3162 Manual

Nature sounds alarm clock

Advertisement

Quick Links

Peakeep NATURE SOUNDS ALARM CLOCK
(MODEL: MHP3162)
Power Source
 AC outlet
Adapter and cord are included. (adapter input: 100-240V AC 50/60Hz, output: 5.0V~DC1.0A)
Backup
 3*AAA non-rechargebale batteries.
When the situations occurred like power failure or adaptor is unplugged, the batteries memorize time and alarm settings.
Note:
For emergency use, batteries can power the display and alarm for few days. For better performance, please use both the
power supplies.
Getting Started
 Connect unit to AC outlet with the adapter and cord included.
 Place 3 AAA batteries for backup.
Setting the Clock Time
Ensure unit is in clock time mode (clock time indicator
displays on the upper left corner of the screen).
1. Press SET button repeatedly, hour, minute, year, month, date will start to blink orderly with each press.
3 Year Blinks
4 Month Blinks
5 Date Blinks
1 Clock Hour Blinks
2 Clock Minute Blinks
2. To get the correct settings with UP or DOWN button while corresponding readout is blinking.
3. Press MODE button to confirm.
NOTE:
 The factory default year is 2015, please set the correct year. Otherwise, day of week will incorrectly display.
 After 30 seconds without any operations, the current setting will be auto-saved.
 As the moment the minute starts flashing, seconds reset to zero.
Setting the Alarm
1. Press MODE button to switch the clock to alarm mode (alarm mode indicator
displays on the screen).
2. Press UP or DOWN button repeatedly, the alarm and snooze indicators
will display or miss. Indicators
display indicating alarm will work. Indicators
miss indicating alarm will not work.
3. Press SET button repeatedly, alarm time of hour, minute, snooze time, sound readout starts to blink orderly with each press.
3 Snooze Time Blinks
4 Alarm Sound# Blinks
2 Alarm Minute Blinks
1 Alarm Hour Blinks
4. To get the desired alarm settings with UP or DOWN button while corresponding readout is blinking.
5. Press MODE button to confirm.
Note:
 Default alarm time is AM 12:00, when setting the alarm time, be careful to select AM or PM indicator if you set the clock in
Regular Time(12-hour)
 1-60 minutes (in 1minute increment) of snooze time are available.
 Alarm Sounds (7sets):
Sound #1--- moo
Sound #2--- cuckoo
Sound #3--- birdsong
Sound #4---croak (made by the frog)
Sound #5---stream
Sound #6---moo + cuckoo + birdsong + croak + stream
Sound #7---beep
 After 30 seconds without any operation in
alarm mode, current setting auto-saved and clock auto-back to
time mode.
Wake to Alarm
When the alarm goes off, the alarm indicator
blinks. Alarm sounds last for 1 minute with gradually louder volume.
Turning Alarm Off
When alarm goes off, press any button on backside. This re-sets the alarm for the next day.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MHP3162 and is the answer not in the manual?

Questions and answers

Summary of Contents for Peakeep MHP3162

  • Page 1 Peakeep NATURE SOUNDS ALARM CLOCK (MODEL: MHP3162) Power Source  AC outlet Adapter and cord are included. (adapter input: 100-240V AC 50/60Hz, output: 5.0V~DC1.0A) Backup  3*AAA non-rechargebale batteries. When the situations occurred like power failure or adaptor is unplugged, the batteries memorize time and alarm settings.
  • Page 2 Suspend Alarm/Snooze Function When alarm goes off, push top button to temporarily suspend the alarm for the snooze time you set. Disable Alarm Press MODE button to switch the clock to alarm mode. Press UP or DOWN button till the alarm indicators miss.