Dahua DHI-HY-SGDZ User Manual

DAHUA DHI-HY-SGDZ Strobe Horn Base
1.
Product Description
The Dahua DHI-HY-SGDZ base is an accessory designed to facilitate the installation of strobe horns in
alarm and notification systems. It features a connector integrated into the structure that simplifies the
electrical connection and guarantees a quick and safe installation.
2.
Main Features
- Compact and robust design.
- Integrated connector for quick connection.
- Heat and impact resistant material.
- Easy mounting on wall or ceiling.
3.
Technical specifications
Dimensions: 125mm × 80mm × 12.1mm
Material: ABS
Weight: 29 g
Operating temperature: -10°C to 55°C
Color: Red
4.
Facility
Tools needed:
- Philips screwdriver.
- Drill (optional, if drilling is required).
- Level.
Installation steps:
1. Select location:
- Choose an accessible and visible location on the wall or ceiling.
- Make sure it is an area free of obstructions.
2. Prepare the surface:
- If necessary, use a drill to make the holes where the base will be fixed.
3. Assemble the base:
- Secure the base with the included screws, making sure it is level.
4. Connect the strobe horn:
- Insert the speaker wires into the built-in connector following the indicated polarity.
- Tighten the connector screws to secure the connection.
5. Secure the horn:
- Place the strobe horn on the base and adjust according to the model specific instructions.
5.
Electrical connection
1. Turn off the power: Before making connections, make sure the system is turned off.
2. Connect the cables:
- Red cable (+): Connect it to the positive terminal.
- Black cable (-): Connect it to the negative terminal.
3. Check connections: Check that the cables are firmly connected and without risk of short
circuit.
4. Power up the system: Restore power and test the strobe horn to confirm operation.
User Manual