Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 8103K
Summary of Contents for Ronix 8103K
- Page 1 CORDLESS RECIPROCATING SAW 8103K...
-
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS Model 8103K Voltage No load speed 0-2700 RPM Cutting capacity 20mm 1Pcs Saw Blade, 2 Pc Accessories 2.0 A.H Battery, Fast Charger, BMC PART LIST Footplate for Plate Releasing Cutting Branches Button Footplate Charger Indicator Saw Blade Switch... -
Page 3: Work Area Safety
WORK AREA SAFETY -Keep work area clean and well lit. Cluttered or dark areas invite accidents. -Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. -Keep children and bystanders away while operating a power tool. - Page 4 under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. -Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
- Page 5 -Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. -Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
- Page 6 -Follow instruction for lubricating and changing accessories. -Keep handles dry, clean and free from oil and grease. IMPORTANT SAFETY INSTRUCTIONS FOR BATTERCARTRIDGE -Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. -Do not disassemble battery cartridge.
-
Page 7: Cut-Off Machine Safety Warnings
the battery service life. -Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. CUT-OFF MACHINE SAFETY WARNINGS - Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring Cutting accessory contacting a “live”... - Page 8 - Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. - Always wait until the machine comes to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. REPLACING/INSERTING THE SAW BLADE WARNING! When mounting the saw blade, wear protective gloves here is danger of...
-
Page 9: Dust/Chip Extraction
REMOVING THE SAW BLADE - Turn the locking sleeve approx. 90°in the direction of the arrow and hold. Remove the saw blade. DUST/CHIP EXTRACTION - Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders. -
Page 10: Switching On And Off
FOOTPLATE FOR CUTTING BRANCHES Press the release button for the footplate and slide the footplate to the required position. Release the footplate release button and check that the footplate is firmly latched. USING INSTRUCTION Place V-shaped opening on branch and push down blade saw and start to cut. NOTE: - If the tool is operated continuously at low speeds for a long period of time, the operation life of the motor will be reduced.
Need help?
Do you have a question about the 8103K and is the answer not in the manual?
Questions and answers