Page 1
Washer-Dryer User Manual GD7 P510457 W 2820530859/ EN/ / 29/03/2024 13:44...
Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
1 Safety Instructions This section includes the safety • The manufacturer assumes no instructions necessary to pre- responsibility for any damage vent the risk of personal injury or due to misuse or mishandling. material damage. • This appliance is intended to be used in household and sim- Our company shall not be held ilar applications.
• Electrical products are danger- • Damaged power cables should ous for children and pets. Chil- be replaced by the authorised dren or pets should not play service in order to prevent pos- with, climb on top or inside the sible danger.
the mains (fuse, switch, main • Make sure that the hoses as switch, etc.) shall be available well as the power cable are not on the electrical installation. folded, pinched or crushed • Do not touch the plug with wet after the product is fitted into hands.
Page 7
• Always wear personal protect- • Do not plug the product to ive equipment (gloves, etc.) loose, broken, dirty, greasy during product installation, sockets or sockets that has maintenance and repair. There come out their seats or sock- is a risk of injury. ets with a risk of water con- •...
• If a drier is to be placed on the • Do not place sources of igni- product, fix with a suitable con- tion (burning candle, cigar- nection apparatus obtained ettes, etc.) or sources of heat from the authorised service. (irons, furnaces, ovens, etc.) on •...
• Do not directly use dry clean- 2. Cut the power cable and dis- ing detergent and do not wash, connect it with the plug from rinse, spin or dry laundry con- the appliance. taminated with dry cleaning 3. Break the locking mechanism detergent.
Page 10
and clothes) or the ones that • If the drying programmes are are filled and damaged (e.g. interrupted (as a result of pro- Pillows or coats). There is a gramme cancellation or power risk of burns. failure), the laundry in the ma- •...
• If there is a problem that you • Do not use softener or anti- cannot solve using the inform- static agent unless recommen- ation given in the safety in- ded by the manufacturer. structions section, turn off and • Products such as softener unplug the machine and call an should be used in accordance Authorized Service.
• If you need to move the soap, detergent, gas, gasoline, product for cleaning, do not thinner, alcohol, varnish, etc. pull on the cover. The cover while cleaning. can break and cause injury! • Cleaning agents containing • Do not put hands, feet and solvents might reek poisonous metal objects under or behind fumes( for ex.
Page 13
or other wastes. Take them to the pack- aging material collection points designated by the local authorities. EN / 13...
3 Technical Specifications Supplier’s name or commercial brand Grundig GD7 P510457 W Model name 7178574800 Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) Single Water inlet / Double Water inlet...
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Tilt the machine back slightly. Rest the tabs WARNING of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get able, attach cover B and the Cap.
WARNING Make sure that the cold water con- nection is performed correctly dur- ing the installation of the product. Otherwise, your laundry may come out as hot at the end of the wash- ing cycle and thus they may be worn.
4.6 Adjusting the Stands • Power cable plug must be within easy reach after installation. • If the current supply to the fuse or WARNING breaker in the house is less than 16 In order to ensure that the product Amps, have a qualified electrician install operates more silently and vibra- a 16 amp supply.
5 Preliminary Preparation • Wash trousers and delicate laundry Please read the “Safety Instruc- turned inside out. tions” section first • Laundry that are subjected to materials 5.1 Sorting the Laundry such as flour, lime dust, milk powder, etc. intensely must be shaken off before pla- •...
ply the method which is described in sec- Follow the instructions in “Pro- tion "Cleaning the loading door and the gramme and consumption table”. drum". When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur. For a successful drying perform- ance, do not put more laundry in the machine than specified.
Page 21
• Do not add washing chemicals (Liquid detergent, Softener, etc.) while the ma- chine is during Drying step. Choosing the Detergent type Detergent type to be used depends on the washing programme, fabric type and col- our. • Use different detergents for coloured and white laundry.
Page 22
• If the softener is not fluid, dilute with wa- • Tablet detergents may leave residue in ter before placing in the softener com- the detergent compartment. If you face partment. such residues, place the tablet detergent among the laundry in the next washes in WARNING a way that it will be at the bottom side of Do not use liquid detergents or...
compartment no. “2” in the detergent Add the decolourant to the same com- drawer and wait for the product to rinse partment while the machine continues away the detergent during water intake. taking in water. 5.8 Tips for Efficient Washing Clothes Light Colours and Black/Dark Col-...
tected by the machine. And if the detected programme duration increased automatic- load is higher than half load; washing pro- ally. You can follow this change on the dis- gramme will be adjusted accordingly and play. 6 Operating the Product Please read the “Safety Instruc- tions”...
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration information 4 Door lock is engaged symbol 5 Programme follow-up indicator 6 No Water indicator 7 Add Garment Indicator 8 Bluetooth Connection Indicator 9 Remote Control Indicator 10 Delayed Start Enabled Indicator 11 Drying Level Indicator 12 Child Lock Enabled symbol...
6.4 Selection of Washing Program Symbols shown on the display are schematic and may not match with 1. Determine the programme suitable for the product one-to-one. the type, quantity and soiling level of the If you do not want to perform dry- laundry in accordance with "Programme ing process after the programme and consumption table".
Page 28
be washable at 40 °C or 60 °C in a single Do not load more than a double cycle and dries them so that they can be fibre duvet (200 x 200 cm). put in a cupboard immediately. Your cotton quilts, pillows, etc. do not machine wash.
• Mini / Mini 14' If you want to use the HomeWhiz Use this program to wash your cotton feature and the Remote Control clothes with very little dirt and spotless in a function, you must select the Pro- short time. With the quick wash function gram Download feature.
6.7 Spin Speed Selection No change can be made in pro- grammes where spin speed adjust- ment is not allowed. You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it.
When the drying programme is selected, the spin speed setting is in the range of Maximum spin speed. In programmes that do not allow the drying setting, when the Drying auxiliary function button is pressed, the drying light will not change and a warning noise will be heard.
• HygieneRefresh The hygienic ventilation program is not a program for washing using Hygienic washing with hot air (program water. Use the laundry you want to duration 58 min.) ventilate in this program. With the hygienic ventilation program, hy- ANNOUNCEMENT:Detergent, gienic cleaning is carried out with air by en- bleach, stain remover etc.
Page 34
You can see the washing duration on the display of your machine while selecting a programme. De- pending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual dura- tion of the wash cycle.
Eco 40-60 + 1400 09:10 5,100 Cupboard 1400 06:35 2,775 The consumption values given for programs other than the wash and dry cycle with the Eco 40-60 program are in- dicative only. 6.11 Auxiliary Function Selection If the selected wetness level (Iron Dry, Cupboard Dry, Cupboard Extra Dry) cannot be reached at the end of the drying programme, your ma-...
For medium and low soiled laundry, use the detergent eye “2”. This program includes Quick wash button to shorten the program the drying step after the boiler cleaning pro- time. cess to dry the inside of the machine. • Remote Control This is not a washing program.
To disable Bluetooth connection: • Child Lock Press and hold the remote control function Use Child Lock function to prevent children button for 3 seconds. The countdown from tampering with the machine. Thus you “3-2-1” is displayed and the Bluetooth sym- can avoid any changes in a running pro- bol disappears on the screen.
When drying a small amount of laundry (maximum 2 items), the timed drying steps in Cotton or Synthetic dry programmes should be selected. If the laundry is not at the desired dryness level at the end of the drying programme, timed drying can be selected to finish the If you want to cancel End Time function, process.
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time indicator If the Remote Control Function is turns off, washing cycle starts and selected, the door will be locked. In the time of the selected pro- order to open the door you must de- gramme appears on the display.
Switching the machine to pause mode: Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display. 6.16 Changing the Selections After Changing the programme selection after Programme has Started programme has started: Adding Laundry after the Programme The programme change is allowed when the current programme is running unless...
6.20 HomeWhiz Feature and Remote If you turn the programme selection knob when the Child Lock is en- Control Function abled, the programme will not be HomeWhiz allows you to use your smart cancelled. You should cancel the device to check your washing machine and Child Lock first.
2. To start the setup, make sure that your In order to use the HomeWhiz func- machine is turned off. Press and hold tion, the application must be in- the Temperature button and the Remote stalled on your smart appliance, Control Function button simultaneously and your washing machine must be for 3 seconds to switch your machine to...
Your washing machine will auto- matically turn off if you cannot real- ize the setup successfully within 5 minutes. In this case, you have to start the setup process all over again. If the problem continues, please contact the Authorised Ser- vice.
6.20.3 Remote Control Function and of your washing machine. Once access is established to the product, you will see a Using It screen similar to the one below. After HomeWhiz setup, bluetooth will auto- matically turn on. To activate or deactivate the Bluetooth connection, please see “Bluetooth 3”.
1. Check whether your smart device is con- 4. If the connection cannot be established nected to the relevant home network. with the above processes, repeat the ini- tial set-up settings on the washing ma- 2. Restart the product application. chine.
7.3 Cleaning the Body and Control If the product fails to drain water inside it, the pump filter is clogged. Filter must be Panel cleaned whenever it is clogged or in every 3 Wipe the body of the product with soapy months.
• Completely turn and remove the pump fil- If the product does not have an emer- ter when the water in the product leaks gency water draining hose, in order to out. drain the water: 1. Clean any residues inside the filter as well as fibres, if any, around the pump impeller region.
Page 48
• Product is leaning on a rigid item. >>> Washing takes longer than specified in Make sure that the product is not leaning the user manual. (*) on anything. • Water pressure is low. >>> Product waits until taking in adequate amount of water There is water leaking from the bottom to prevent poor washing quality due to of the product.
Page 49
Programme duration does not count- Washing performance is poor: Stains down. (*) persist or the laundry is not whitened. (**) • There is unbalanced load in the product. >>> Automatic unbalanced load detection • Insufficient amount of detergent is used. system is activated due to the unbal- >>>...
Page 50
• Detergent was mixed with the softener. Washing machine does not rinse well. >>> Do not mix the softener with deter- • The amount, brand and storage condi- gent. Wash and clean the drawer with hot tions of the detergent used are inappro- water.
Page 51
• Detergent was stored under improper • The machine might have been over- conditions. >>> Store detergent in a loaded. >>> Do not overload the machine. closed and dry location. Do not store in • Spinning might not be sufficient for laun- excessively hot places.
Therefore, please be advised that gistered professional repairers. On the con- repairs by professional repairers (who trary, such attempts by end-users may are not authorized by Grundig ) shall void cause safety issues and damage the the guarantee. product and subsequently cause fire, flood,...
Page 53
gistered professional repairers: motor, pump assembly, main board, motor board, display board, heaters etc. The manufacturer/seller cannot be held li- able in any case where end-users do not comply with the above The spare part availability of the washing machine or washer-dryer that you pur- chased is 10 years.
Need help?
Do you have a question about the GD7 P510457 W and is the answer not in the manual?
Questions and answers