Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MPS Manuals
  4. Computer Hardware
  5. EV8017-RJ45-00A
  6. Quick start manual

MPS EV8017-RJ45-00A Quick Start Manual

Poe cable connection board for the evl8017 evaluation boards
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
DESCRIPTION
The EV8017-RJ45-00A RJ45 connection board
is designed to deliver power over Ethernet (PoE)
power from the Ethernet cable to the EVL8017 .
The EVL8017 evaluation boards demonstrate
the capabilities of the MP8017, an integrated
IEEE 802.3af-compatible, PoE-powered device.
PERFORMANCE SUMMARY
Specifications are at T
A
Parameters
Input (IN)
Output 1 (OUT1)
Output 2 (OUT2)
Power specification
CONNECTION BOARD
Note:
1) The MP8017 IC is not included on the EV8017-RJ45-00A.
EV8017-RJ45-00A Rev. 1.0
9/16/2021
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
= 25°C, unless otherwise noted.
Jack
J1
J2
J3
LxWxH (4.7cmx4.2cmx1.5cm)
2 Layers, 1oz/1oz
Board Number
EV8017-RJ45-00A
MonolithicPower.com
© 2021 MPS. All Rights Reserved.
EV8017-RJ45-00A
PoE Cable Connection Board
for the EVL8017 Evaluation Boards
It is recommended to read the MP8017 and
EVL8017 datasheets prior to making any
changes to the EV8017-RJ45-00A.
Value
Ethernet cable from PSE
Ethernet cable signal output
Ethernet cable power output
IEEE 802.3af
MPS IC Number
MP8017GL
(1)
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the EV8017-RJ45-00A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MPS EV8017-RJ45-00A

Summary of Contents for MPS EV8017-RJ45-00A

  • Page 1 2 Layers, 1oz/1oz Board Number MPS IC Number EV8017-RJ45-00A MP8017GL Note: 1) The MP8017 IC is not included on the EV8017-RJ45-00A. EV8017-RJ45-00A Rev. 1.0 MonolithicPower.com 9/16/2021 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved.
  • Page 2 Ethernet (PoE) from the Ethernet cable to the EVL8017 evaluation boards to evaluate the MP8017’s performance. To set up the EV8017-RJ45-00A, refer to Figure 1 and follow the steps below: 1. Figure 1 shows the connection method using the EVL8017-L-00A.
  • Page 3 8P8C Wurth 615008140121 RJ45, 120V Connector, angled pin 2.54mm Wurth 61300411021 header WE-LAN series LAN 350µH Wurth 749020011A transformer EV8017-RJ45-00A Rev. 1.0 MonolithicPower.com 9/16/2021 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved.
  • Page 4 EVL8017-L-00A, I = 1A CH1: EVL8017- L-00A V CH2: EV8017- RJ45-00A V CH3: EVL8017- L-00A SW CH4: EV8017- RJ45-00A I EV8017-RJ45-00A Rev. 1.0 MonolithicPower.com 9/16/2021 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved.

  • Page 5: Pcb Layout

    EV8017-RJ45-00A – RJ45 CONNECTION EVALUATION BOARD PCB LAYOUT Figure 3: Top Silk Figure 4: Top Layer Figure 6: Bottom Silk Figure 5: Bottom Layer EV8017-RJ45-00A Rev. 1.0 MonolithicPower.com 9/16/2021 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2021 MPS. All Rights Reserved.

  • Page 6: Revision History

    09/16/2021 Initial Release Notice: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third-party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications.