LAWO R3LAY VSC Quick Start Manual

R3LAY VSC Quick Start Guide
What You'll Need
•
An Ethernet cable
•
Your R3LAY VSC License Key (this may be printed on your software order receipt, or, if you also
purchased an OnAir 4 interface, in the box itself)
•
A PC or laptop with a benchmark of more 8,000 points or better
•
Some time to read your User Manual!
Getting Started
If you have a Lawo OnAir 4 interface, connect it to your PC or laptop with an Ethernet cable. Without
turning on the computer, apply power to your OnAir 4. The front-panel display will show a configuration
notice; wait until configuration is complete (approximately 2 minutes), then switch on the computer.
Use your Web browser to navigate to
already have an account on the Lawo site; simply enter your username and password to log in. If you do
not have an account, please complete the Registration process.
After registration, go to the Downloadcenter and click / 30_virtual _radio/R3LAY_VRX8 .
•
First, click the Software sub-folder and download the latest installation software (filename starts
with LawoR#LAYVRX8Setup).
•
Second, click the Documentation sub-folder and download the latest User Guide and Software
Licensing Quickstart PDFs.
www.lawo.com and click the LOGIN button at top right. If you
•
file and double-click to install.
•
register it using the License Key provided; without
registration the system runs in Demo mode only.
•
Kit (WIBU Systems AG) installed on your
computer by the R3LAY installer. Type in the
license key and select the "Single System" option
(if you have a single system). Follow the
instructions onscreen to register your software –
see the Software Licensing QuickStart document
for more information if needed.
Extract the setup software from the ZIP
Once the software is installed, you must
To register, open the CodeMeter Runtime