Product Overview In‐ear Earphones (left & right) Charging Case USB‐C Charging Cable Ear Tips × 3 pairs (M size installed) Quick Start Guide and Warranty Letter 1. Multi Function Button(MFB) 2. Indicator Light (White) 3. Microphones 4. Ear Tip 5. USB‐C Charging Port 6. Pair/ Reset to Factory Settings Button 7. Charging Case 8. Charging Case Indicator Light ...
Page 3
Pairing Open the charging case, the earphones will be turned on automatically. Left and right earphones will be connected automatically within few seconds. Then “pairing” voice prompt will be heard. For new device connection, go to the Bluetooth settings on your device and set it to search for new devices (new Monster device). Once the earphones are paired to the designated device, you will hear “connected”. Connect other devices Keep the earphones in the charging case and leave the cover open. Press and hold the pair button which is located on the bottom of the charging case for about 2 seconds until the light ...
Page 4
LED Indicator Guide Mode Description Voice prompts Indicator light stays on about 1 second. Power On “Power On” Indicator light stays on about 1 second. Power Off “Power Off ” Indicator light flashes quickly. Pairing “Pairing” Connected After connected, Indicator light goes off. “Connected” When left earphones is charging, the left Earphones charging ‐ indicator light is on. When right earphones is charging, the right indicator light is on. When both earphones are charging, the left and right indicator lights are on respectively. Charging case indicator light flashes while Charging case ...
Page 5
as sunlight or fire. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ...
Need help?
Do you have a question about the CLARITY AirLinks and is the answer not in the manual?
Questions and answers