1010 Music bento Quick Start Manual

bento quick start guide
Getting Started
Power On/Off

Power On: Hold the power button (back right corner)
until the mode lights turn on
 Power Off: Hold the power button until the screen
goes dark

Battery: The built-in battery charges when plugged in
but charges faster when the unit is off Battery Status:
Check the battery icon and percentage in the lower
corner of the screen
MicroSD Card

Insert card with metal leads facing up
 Push to eject (be careful, the spring is strong!)

The microSD card stores all samples, patches, and
projects
Navigating the Interface

Mode Buttons: TRACKS, LAUNCH, INST, SEQ, MIXER, FX,
PROJ
 Arrow Buttons: Use Left/Right arrows to drill in for more
detail and use Up/Down arrows to adjust the octave for
the selected track

Transport Controls: REC, STOP, PLAY

Touch Screen: Tap to select, double-tap to edit, use
gestures to zoom/scroll

Pads: Play instruments, trigger loops/samples, or
program sequences

Knobs: Adjust settings
Working with Tracks
Track Screen
Access by pressing TRACKS button. View all 8 tracks and select which one to play.
 Tap a track to select it
 Hit the pads to play the selected track

Double-tap a track or press INST to edit the
instrument

Use knobs to control output levels, BPM and
brightness
Power Button
MicroSD Slot