Advertisement
Quick Links
AT&T Eco Rating 2.0 only applies to the NETGEAR
Nighthawk 5G Mobile Hotspot, model M5000. For
limited factors evaluated visit att.com/EcoSpace.
Wireless Emergency Alerts is a registered Trademark
and Service Mark of CTIA.
NETGEAR and Nighthawk are trademarks of
NETGEAR, Inc. 5G is a trademark of 3GPP. 5G not
available everywhere. Contains Lithium ion battery -
recycle or dispose of properly.
© 2018 AT&T Intellectual Property. All rights reserved.
AT&T, the AT&T logo and all other AT&T marks
contained herein are trademarks of AT&T Intellectual
Property. All other marks are the property of their
respective owners.
Printed in USA
Set Up Your Nighthawk 5G
Mobile Hotspot
1 Insert the battery.
2 Install the back cover.
The battery is partially charged. When you
need to recharge it, connect the USB cable to
the mobile hotspot and then plug into:
• A wall socket, using the wall charger (faster
charge option)
• The USB port on your laptop
Note: The mobile hotspot comes with a preinstalled SIM card.
The SIM must be activated to a data plan with AT&T.
Get to Know Your Nighthawk 5G
Mobile Hotspot
Touch screen
Touch to
navigate
Power
button
Do we need art to show the
USB port location?
USB C port
DRAFT
201-24043-01
LCD Screen
Signal
SIM card
strength
(preinstalled)
Number of
connected
devices
Messages
Your wireless device displays a network
indicator to let you know which of AT&T's
wireless networks you are connected to.
5G+
RAN
4G LTE
HSPA+n
Battery charge
Connect to the Internet
Turn on your mobile hotspot
1 Press and hold the Power button for 2
seconds.
Home
Note: The screen displays the hotspot's Wi-Fi network
name and password.
Back
On your laptop or other wireless device
2 Open your Wi-Fi/network connection
manager.
3 Find your mobile hotspot's Wi-Fi network
name (ATT-WIFI-XXXX) and connect.
4 Enter your mobile hotspot's Wi-Fi password.
5 Launch your Internet browser.
Note: The screen goes dark to save power. Press and release
the Power button to wake the screen.
FOR
Network
POSITION
indicator
ONLY
Battery
Wi-Fi network
name and
password
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for NETGEAR Nighthawk M5000
Summary of Contents for NETGEAR Nighthawk M5000
- Page 1 4 Enter your mobile hotspot’s Wi-Fi password. NETGEAR and Nighthawk are trademarks of 5 Launch your Internet browser. NETGEAR, Inc. 5G is a trademark of 3GPP. 5G not Do we need art to show the Note: The screen goes dark to save power. Press and release available everywhere.
- Page 2 ALL IMAGES ARE LCD Screens WiFi Manager WiFi Settings FOR POSITION ONLY You can use a browser to view and change the Change Wi-Fi network name and password Press the Navigation button to scroll mobile hotspot settings. through the screens. 1 On your Wi-Fi device, type http://attwifimanager in the browser bar.
- Page 3 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 4 Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
Need help?
Do you have a question about the Nighthawk M5000 and is the answer not in the manual?
Questions and answers