Features; Assembly; Product Specifications - Ryobi DS1108 Operator's Manual

PRODUCT SPECIFICATIONS

Sanding Pad ............................................. Triangle Shaped
Paper Type .............. Pressure Sensitive Adhesive Backed
Arc Size ........................................................3.0 mm at Tip
KNOW YOUR DETAIL SANDER
See Figure 1, Page 11.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Detail Sander
Operator's Manual

FEATURES

Motion ............................................................... Oscillating
No Load Speed .................................. 12,000 r/min. (RPM)
Input ............................. 120 V, 60 Hz, AC only, 0.30 Amps
OSCILLATING MOTION
The oscillating motion sands 3.0 mm arcs, providing fast
cutting action with excellent sanding results. As the name
implies, this tool has been designed primarily for detailed
and intricate sanding, i.e. refinishing furniture, chairs, etc.,
enabling you to sand in places that are hard to get to.

ASSEMBLY

WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
8 — English