Desktop Computer - Samsung UF-80DX User Manual

UF-80
Connecting to output device

Desktop computer

USB connection
Connect to the USB port on your PC,
then install the supplied UF-80 program.
Caution
RS-232C connection
Connect the cable to the
RS-232C terminal on your PC.
RS-232C cable is not provided with the presenter.
You can obtain one from your computer dealer.
16
Page
We recommend you to connect to USB port which is attached on computer main board.
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 5.0 m.
Connect a desktop PC and the presenter using USB
cable and install the supplied program. You can see
the projected image on the PC monitor and control the
image using the program.
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to control
the projected image on PC. Ask your dealer for further
details.
DV I
MO US E
RS-232C
Digital Presenter
DV I
MO US E
RS-232C
Digital Presenter
VGA OUT VGA IN USB
VGA OUT VGA IN USB