Solo 461 Quick Start Manual
Cordless heat detector tester
Hide thumbs
Also See for 461:
- Instruction manual (24 pages) ,
- Original instructions manual (10 pages) ,
- Instructions (2 pages)
Advertisement
Quick Links
Solo
461 Cordless Heat Detector Tester
1
Insert a charged battery
baton into the tool and pole.
Caution
Ensure correct
orientation when inserting
battery baton into tool and do
not use undue force to insert.
2
2
Press the red switch to turn
on. LED illuminates green.
Flash at slow rate indicates
normal STANDBY mode.
3
Position the latch and place
over detector.
Tip
Ensure the
detector rests
firmly on
platform.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Solo 461
Summary of Contents for Solo 461
- Page 1 Solo 461 Cordless Heat Detector Tester Insert a charged battery Press the red switch to turn Position the latch and place baton into the tool and pole. on. LED illuminates green. over detector. Flash at slow rate indicates Ensure the...
- Page 2 Solo Battery Baton Charging The tool will automatically start testing when infra-red beam in cup is broken. The green LED will flash faster. Hold in place until the alarm is activated*. When the detector alarms, remove the tool from the detector.
Need help?
Do you have a question about the 461 and is the answer not in the manual?
Questions and answers