Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander Operator's Manual page 9

NOTE: Only thosedustmasks suitable forworking withleadpaintdustandfumes should
beused. O rdinary p ainting masks donotoffer t hisprotection. Seeyourlocal h ardware
dealer f ortheproper ( NIOSH approved) mask.
NO EATING, DRINKING OR SMOKING should be done in the work area to
prevent ingesting contaminated paint particles. 'Workers should wash and
clean up BEFORE eating, drinking or smoking. Artiicles of food, drink, or
smoking should NOT be left in the work area where contaminated dust would
settle on them.
° Paint should be removed in such a manner as to m, i nimize the amount of dust
generated.
• Areas where paint removal is occurring should be sealed with plastic sheeting
of 4 mils thickness.
Sanding should be done in a manner to reduce trac'king of paint dust outside
the work area.
All surfaces in the work area should be vacuumed and thoroughly cleaned daily
for the duration of the sanding project. Vacuum filter bags should be changed
frequently.
Plastic drop cloths should be gathered up and diisposed of along with any dust
chips or other removal debris. They should be placed in sealed refuse receptacles
and disposed of through regular trash pick-up procedures. During clean up,
children and pregnant women should be KEPT AWAY from the immediate work
area.
All toys, washable furniture and utensils used by children should be washed
thoroughly before being used again.
ADDITIONAL RULES FOR SAFE OPERATION
Z_ WARNING:
BE SURE to read and understand all instructions.
Failure to follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
1. Know your power tool. Read operator's manual carefully. Learn the applications and
limitations,as well as the specific potential hazards related to this tool. Following this rule
will reduce the risk of electric shock, fire or serious injury.
2. ALWAYS wear safety glasses or eye shields when using this tool. Everyday
eyeglasses have only impact-resistantlenses; they are NOT safety glasses.
3. PROTECT your lungs. Wear a face mask or dust mask iifthe operation is dusty.
4. PROTECT your hearing. Wear appropriate personal Ihearing protection during use.
Under some conditionsnoise from this product may contn'ibute to hearing loss.
5. ALL VISTORS AND BYSTANDERS MUST wear the same safety equipment that the
operator of the tool wears.
27675
2/11/08