Operating Controls And Adjustments; Starting And Stopping Saw; Locking Switch In The "Off" Position - Delta 36-650 Instruction Manual

OPERATING CONTROLS AND ADJUSTMENTS

STARTING AND
STOPPING SAW
1. The on/off switch is located underneath the switch
shield (A) Fig. 54. To turn the saw "ON," move switch
trigger (B) to the up position.
2. To turn the saw "OFF," push down on switch shield
(A) Fig. 55.
LOCKING SWITCH IN
THE "OFF" POSITION
IMPORTANT: When the tool is not in use, the switch (B)
Fig.56, should be locked in the OFF position using a
padlock (C), with a 3/16" diameter shackle to prevent
unauthorized use.
A
B
A
C
B
19
Fig. 54
Fig. 55
Fig. 56