Power Menu; Suspend Mode; Repost Video On S3 Resume; Acpi 2.0 Support - Asus Pundit P3-PH4C User Manual

IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
5.5

Power menu

The Power menu items allow you to change the settings for the Advanced
Configuration and Power Interface (ACPI) and the Advanced Power
Management (APM). Select an item then press <Enter> to display the
configuration options.

Suspend Mode

Repost Video on S3 Resume

ACPI 2.0 Support

ACPI APIC Support

APM Configuration
Hardware Monitor
5.5.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface
(ACPI) state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
5.5.2 Repost Video on S3 Resume [No]
Allows you to determine whether to invoke VGA BIOS POST on S3/STR
resume. Configuration options: [No] [Yes]
5.5.3 ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
5.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Application-Specific Integrated Circuit
(ASIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Configuration options: [Disabled] [Enabled]
5-28
[Auto]
[No]
[No]
[Enabled]
Chapter 2: BIOS setup