Download Print this page
Kenmore 94812 Operating Instructions
Kenmore 94812 Operating Instructions

Kenmore 94812 Operating Instructions

Washer laundry center, laundry center dryer

Advertisement

Quick Links

Before Operating Your Washer
Read your Owner's Guide. It has important safety
and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your Owner's Guide
before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's
Guide. It explains these operating steps in detail.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent to
wash tub.
Printed in U.S.A.
®
5. If desired, add liquid bleach to Bleach
Dispenser.
6. Add laundry load to wash tub.
7. If desired, add liquid fabric softener to Fabric
Softener Dispenser.
8. Set cycle selector and washer controls
according to type, size, and soil level of each
load.
9. Close lid and pull cycle selector knob to start
washer. The lid must be closed to agitate or
spin. The washer will automatically turn off if the
lid is lifted during agitation. For your safety, the
lid locks when the tub is spinning.
10. Remove items at end of cycle. Wait about 2
minutes for safety lid lock to release.
Cycle Selection
Always follow instructions on fabric care labels.
The Regular, Perm Press and Delicates cycles
provide a first spin, followed by a deep rinse and a
spray rinse during final spin.
Washer Operating Instructions
Laundry Center Models 94812 / 94814 / 94872
PERM PRESS
Regular Cycle
This cycle provides up to 15 minutes of normal wash
agitation followed by a fast spin for most fabrics.
Extra Rinse Cycle
Use the Extra Rinse cycle after a complete wash
cycle when an additional rinse is desired. It provides
3 minutes of rinse agitation, followed by a spray rinse
during spin at the selected rinse water temperature.
Perm Press Cycle
This cycle provides up to 12 minutes of normal wash
agitation followed by a fast spin for cottons and
blends with a no-iron finish.
Select the Perm Press Prewash setting to help
loosen soil and remove stains before washing. Add
recommended amount of detergent and other laundry
products desired to tub. Add load. Select a cold
water rinse, appropriate load size and fast agitation
speed. Load will agitate 4 minutes, drain and spin.
Follow Perm Press Prewash with a complete Perm
Press cycle.
PREWASH
P/N 134219600 (0403)

Advertisement

loading
Need help?

Need help?

Do you have a question about the 94812 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kenmore 94812

  • Page 1 Washer Operating Instructions Laundry Center Models 94812 / 94814 / 94872 ® PERM PRESS PREWASH 5. If desired, add liquid bleach to Bleach Regular Cycle Before Operating Your Washer Dispenser. This cycle provides up to 15 minutes of normal wash Read your Owner's Guide.
  • Page 2 Cycle Selection (continued) Controls Delicates Cycle WATER LEVEL sets the amount of wash and rinse water Always follow instructions on fabric care for the wash load. Select a water level appropriate for the labels. This cycle provides 6 minutes of gentle wash load size.
  • Page 3 Laundry Center Dryer Operating Instructions ® Models 94802 / 94812 / 94814 / 94862 / 94872 Before Operating Your Dryer Select the temperature setting most suitable for each 5. Set Drying Temperature control. load. The REGULAR--HIGH HEAT, PERM PRESS-- It has important safety Read your Owner's Guide.
  • Page 4 Cycle Selection (continued) Laundry Center Features Automatic Cycle Air Fluff Cycle • TOWELS - This setting is best for towel This cycle provides approximately 20 minutes loads. Select the REGULAR--HIGH HEAT of tumbling without heat. Use Air Fluff to dry CONVENIENCE temperature setting.

This manual is also suitable for:

94814948729480294862