Before Operating Your W asher
Read your Owner's Guide. It has important safety
and warranty information. It also has many
suggestions for best washing results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your Owner's Guide
before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's
Guide. It explains these operating steps in detail.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent to
wash tub.
Printed in U.S.A.
®
5. If desired, add liquid bleach to Bleach
Dispenser.
6. Add laundry load to wash tub.
7. If desired, add liquid fabric softener to Fabric
Softener Dispenser.
8. Set cycle selector and washer controls
according to type, size, and soil level of each
load.
9. Close lid and pull cycle selector knob to start
washer. The lid must be closed to agitate or
spin. The washer will automatically turn off if the
lid is lifted during agitation. For your safety, the
lid locks when the tub is spinning.
10. Remove items at end of cycle. Wait about 2
minutes for safety lid lock to release.
Cycle Selection
Always follow instructions on fabric care labels.
The Regular, Perm Press and Delicates cycles
provide a spray rinse during the first spin, followed
by a deep rinse and final spin.
W asher Operating Instructions
Laundry Center Models 93802 / 93862
Regular Cycle
This cycle provides up to 15 minutes of normal wash
agitation followed by a fast spin for most fabrics.
Extra Rinse Cycle
Use the Extra Rinse cycle after a complete wash
cycle when an additional rinse is desired. It provides
3 minutes of rinse agitation, followed by a spin at the
selected wash water temperature.
Select Automatic Extra Rinse to automatically
advance to the Extra Rinse cycle after the Regular
cycle is completed.
Perm Press Cycle
This cycle provides up to 12 minutes of normal wash
agitation followed by a fast spin for cottons and
blends with a no-iron finish.
P/N 134141700 (0203)
Need help?
Do you have a question about the 93802 and is the answer not in the manual?
Questions and answers