Preparing To Download Images; Connecting The Camera And Computer; Starting Up Eu - Canon 9320A010 - EOS Rebel XSi Starter Instruction Manual

Preparing to Download Images

To download to your computer images shot with your camera, you will
need to connect your camera and computer using the interface cable
provided with your camera.

Connecting the Camera and Computer

1
Connect the large plug of the cable into the USB port
of your computer.
For the location and direction of the USB port, refer to the
computer User's Manual.
2
Connect the small plug of the cable into the <
terminal on your camera.
Connect with the < > mark on the plug facing the front of the
camera.
Image downloading preparation is now complete. Continue with

"Starting up EU".

With the 1Ds Mk III 1D Mk III
with the cable protector to prevent the plug from disconnecting.
For details on using, refer to p.24.
, you can fix the plug to the camera
Starting up EU
When the camera's power switch is set to < ON >, EU will start up, and
the camera and computer will be able to communicate.
1
Set the camera's power switch to < ON >.
Communication between the camera and the computer begins
>
and the above dialog box appears before the dialog box in step 2
(Next page) is displayed.
With Windows 2000, a dialog box with a message such as
[Found New Hardware] is displayed and then automatically
disappears.
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
5