White Balance With The Remote Live View Window; White Balance For Flash Photography - Canon 9320A010 - EOS Rebel XSi Starter Instruction Manual

White Balance with the Remote Live View Window

You can change the white balance for images displayed in the Remote
Live View window.
Select the white balance to apply to the image.
The selected white balance is applied to the image displayed in
real time and you can check it in the [Remote Live View window].
To register the set white balance to your camera, click the [Apply
to camera] button.
Even if you set white balance here at this point, this set white
balance is not applied to images that will be taken in step 6 on p.26.
To apply white balance to images that will be taken, click the [Apply
to camera] button to register the white balance to the camera as the
personal white balance, and then select the registered white
balance in the camera before taking images.

White Balance for Flash Photography

When taking flash shots where the subject is illuminated
instantaneously, you can take a test shot under the same conditions as
a actual shot, and adjust the white balance in the [Test Shooting]
window based on the shot test image.
1
Click the [ ] button.
The shot image is displayed in the [Test Shooting] window.
Test Shooting window
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
29 29